Printable Version | Subscribe | Add to Favourites
New Topic New Poll New Reply
Author: Subject: M12 x 1.25 bolt supplier needed
smart51

posted on 24/3/11 at 02:06 PM Reply With Quote
M12 x 1.25 bolt supplier needed

I need a couple of M12 x 1.25 pitch x 90mm long plated bolts at 8.8 grade and matching nuts. My local supplier wasn't interested, namrick don't do them and eBay has drawn a blank. Any idea where I can get some? Even 1 would get me back on the road.






View User's Profile View All Posts By User U2U Member
r1_pete

posted on 24/3/11 at 02:28 PM Reply With Quote
What are they for? I only ask because I have some 3/8 UNF which will apply much the same clamping force / torque, but will be very slightly smaller in diameter.
View User's Profile E-Mail User Visit User's Homepage View All Posts By User U2U Member
smart51

posted on 24/3/11 at 02:35 PM Reply With Quote
suspension link bolts for a Suzuki Cappuccino. 3/8 is too small to replace an M12 in any case but thanks for the offer.






View User's Profile View All Posts By User U2U Member
r1_pete

posted on 24/3/11 at 03:07 PM Reply With Quote
Sorry, I must be gouing senile, I read M10 for M12....

I'll take a look later I've got some M12 Bolts in one of my trays...

View User's Profile E-Mail User Visit User's Homepage View All Posts By User U2U Member
Johneturbo

posted on 24/3/11 at 03:11 PM Reply With Quote
I've used these guys for the odd nut/bolt. if they have what you need i could always pop in and send it on

http://www.themontrosegroup.com/Fasteners

View User's Profile Visit User's Homepage View All Posts By User U2U Member
lexus

posted on 24/3/11 at 03:14 PM Reply With Quote
These people are brilliant. Have never tried them 'mail order', but face to face they are just so helpful. I don't think there will be a car nut/bolt that they don't do. I got some really weird sizes from them when I was building my Westfield. They are well worth a call/look
http://www.margnor-online.co.uk/

View User's Profile View All Posts By User U2U Member
HowardB

posted on 24/3/11 at 04:40 PM Reply With Quote
also Annalex Bute near leiester, excellent service.





Howard

Fisher Fury was 2000 Zetec - now a 1600 (it Lives again and goes zoom)

View User's Profile View All Posts By User U2U Member
40inches

posted on 24/3/11 at 05:36 PM Reply With Quote
I have used this ebay supplier before. M12 x 90 METRIC FINE THREAD 1.25 MM HEX 8.8 BOLTS x 4 on eBay (end time 15-Apr-11 10:38:18 BST) .Not really cheap though.
View User's Profile View All Posts By User U2U Member
Grimsdale

posted on 24/3/11 at 05:40 PM Reply With Quote
you could try high tensile bolts ltd in worksop or williams fasteners http://www.williamsfasteners.com/
View User's Profile View All Posts By User U2U Member
oadamo

posted on 24/3/11 at 05:51 PM Reply With Quote
they have a counter just in the shutter door and sell to public and there prices are really cheap. they will have em.
adam





Willenhall Fasteners Ltd
Frederick William Street, Willenhall - 01902 630760

View User's Profile View All Posts By User U2U Member

New Topic New Poll New Reply


go to top






Website design and SEO by Studio Montage

All content © 2001-16 LocostBuilders. Reproduction prohibited
Opinions expressed in public posts are those of the author and do not necessarily represent
the views of other users or any member of the LocostBuilders team.
Running XMB 1.8 Partagium [© 2002 XMB Group] on Apache under CentOS Linux
Founded, built and operated by ChrisW.