Printable Version | Subscribe | Add to Favourites
New Topic New Poll New Reply
Author: Subject: where am i likely to find something like this?
blakep82

posted on 20/4/11 at 06:18 PM Reply With Quote
where am i likely to find something like this?

my new denso pulley has a 15mm hole, and the pulley has a 17mm hole

the easiest fix i can see is to put this sort of thing in

Description
Description


its tiny though, too small to be done on a lathe i think... any ideas?





________________________

IVA manual link http://www.businesslink.gov.uk/bdotg/action/detail?type=RESOURCES&itemId=1081997083

don't write OT on a new thread title, you're creating the topic, everything you write is very much ON topic!

View User's Profile View All Posts By User U2U Member
hucky

posted on 20/4/11 at 06:23 PM Reply With Quote
may be a long shot buy try a cycle shop, see if they have any head stem spacers. they may do the job if small enough. carbon, steel and ali i think they do them in.
View User's Profile View All Posts By User U2U Member
blakep82

posted on 20/4/11 at 06:28 PM Reply With Quote
awesome halfords? or do i need to be more specialised than them?
i think theres a specialist round here somewhere





________________________

IVA manual link http://www.businesslink.gov.uk/bdotg/action/detail?type=RESOURCES&itemId=1081997083

don't write OT on a new thread title, you're creating the topic, everything you write is very much ON topic!

View User's Profile View All Posts By User U2U Member
hucky

posted on 20/4/11 at 06:40 PM Reply With Quote
just been looking for them on the net, didnt look at the size, these are going to be about 20mm+ at least not 1.5. but what about maybe a sump washer? their are some small nissan ones about, or maybe fibre washers depending on its use?
View User's Profile View All Posts By User U2U Member
mcerd1

posted on 20/4/11 at 06:40 PM Reply With Quote
make one on a lathe - it can be done

[edit]
thinking about it a bit more - is the pulley a press fit job ?



[Edited on 20/4/2011 by mcerd1]





-

View User's Profile View All Posts By User U2U Member
blakep82

posted on 20/4/11 at 07:00 PM Reply With Quote
quote:
Originally posted by mcerd1
make one on a lathe - it can be done

[edit]
thinking about it a bit more - is the pulley a press fit job ?



[Edited on 20/4/2011 by mcerd1]


press fit, no, its tight, but came off its original alternator by hand





________________________

IVA manual link http://www.businesslink.gov.uk/bdotg/action/detail?type=RESOURCES&itemId=1081997083

don't write OT on a new thread title, you're creating the topic, everything you write is very much ON topic!

View User's Profile View All Posts By User U2U Member
mcerd1

posted on 20/4/11 at 07:02 PM Reply With Quote
^^ I think I've sent you too many u2u's now :?

have you got a pic ?





-

View User's Profile View All Posts By User U2U Member
oadamo

posted on 20/4/11 at 07:03 PM Reply With Quote
cant you open the hole up in the pulley to make the spacer ring bigger.
adam

View User's Profile View All Posts By User U2U Member
hucky

posted on 20/4/11 at 07:10 PM Reply With Quote
what altonator is it off?
View User's Profile View All Posts By User U2U Member
oadamo

posted on 20/4/11 at 07:11 PM Reply With Quote
or if its a steel pulley just weld the hole up and lathe it out again.
adam

View User's Profile View All Posts By User U2U Member
blakep82

posted on 20/4/11 at 07:16 PM Reply With Quote
quote:
Originally posted by oadamo
or if its a steel pulley just weld the hole up and lathe it out again.
adam


ooh, i like it. think this may work out well! i'm going to take to someone tomorrow, see what he says before i weld it up!





________________________

IVA manual link http://www.businesslink.gov.uk/bdotg/action/detail?type=RESOURCES&itemId=1081997083

don't write OT on a new thread title, you're creating the topic, everything you write is very much ON topic!

View User's Profile View All Posts By User U2U Member
oadamo

posted on 20/4/11 at 07:18 PM Reply With Quote
quote:
Originally posted by blakep82
quote:
Originally posted by oadamo
or if its a steel pulley just weld the hole up and lathe it out again.
adam


ooh, i like it. think this may work out well! i'm going to take to someone tomorrow, see what he says before i weld it up!


ive done it before i welded a ring in the middle of the hole to build it up then filled it each side. just dont go mad let it cool a few times.
adam

saying that you only need a mm i would just put a thin weld around it then skim it out.
adam

[Edited on 20/4/11 by oadamo]

View User's Profile View All Posts By User U2U Member

New Topic New Poll New Reply


go to top






Website design and SEO by Studio Montage

All content © 2001-16 LocostBuilders. Reproduction prohibited
Opinions expressed in public posts are those of the author and do not necessarily represent
the views of other users or any member of the LocostBuilders team.
Running XMB 1.8 Partagium [© 2002 XMB Group] on Apache under CentOS Linux
Founded, built and operated by ChrisW.