Printable Version | Subscribe | Add to Favourites
New Topic New Poll New Reply
Author: Subject: Megajolt ECU setup
ttalps2000

posted on 20/2/20 at 12:48 PM Reply With Quote
Megajolt ECU setup

Got a Megajolt ecu setup (ignition only) with the Ford EDIS module, coil pack and bracket, leads and VR sensor cable. All setup for TPS input, however you could put back in the resistor that switches it back to MAP if required. it has the MAP sensor in the ecu. Will require a new plug for the wiring.

Has a hard rev limiter fitted also which was an upgrade at the time.

Was used on my Zetec for 2 years. Going to TB's now so no longer required. All in good working order and never had an issue with it. Cost me £400 new from Trigger Wheels.

£225 posted.

Is this a TRADE ADVERTISEMENT?? Click HERE to report it!

View User's Profile View All Posts By User U2U Member
macc man

posted on 20/2/20 at 06:31 PM Reply With Quote
You have a U2U.
View User's Profile View All Posts By User U2U Member

New Topic New Poll New Reply


go to top






Website design and SEO by Studio Montage

All content © 2001-16 LocostBuilders. Reproduction prohibited
Opinions expressed in public posts are those of the author and do not necessarily represent
the views of other users or any member of the LocostBuilders team.
Running XMB 1.8 Partagium [© 2002 XMB Group] on Apache under CentOS Linux
Founded, built and operated by ChrisW.