Board logo

Mondeo Gearchange Spring
RazMan - 3/10/06 at 12:21 PM

Sounds daft doesn't it but my local scrappy can't help. I need the little lift ring spring that goes under the gear knob.

Any chance?

[Edited on 3-10-06 by RazMan]


Peteff - 3/10/06 at 12:28 PM

There isn't a spring in mine. The rubber thing with the circlip on top supplies the springing for the reverse detent.


RazMan - 3/10/06 at 12:36 PM

Its a remote gearchange so I'm not really sure tbh - but I am certain it comes from a Mondeo. Silver plastic lift ring connected to two 'pops' if that helps. Looks like a valve spring sized jobby that will drop over the shaft.


[Edited on 3-10-06 by RazMan]


Donners90 - 3/10/06 at 02:50 PM

Could always try your friendly Ford dealer! Prices for indication only......

Part 10
FINIS:- 1037684 £0.74

Part 9
FINIS:- 1037683 £2.43

Part 8
FINIS:- 1037682

Part 7
FINIS:- 1037680 Rescued attachment untitleds.JPG
Rescued attachment untitleds.JPG


RazMan - 3/10/06 at 02:57 PM

You are a star Donners!

74 pence - that's what I call locost!!
Ta very much

[Edited on 3-10-06 by RazMan]