nick9one1
|
| posted on 1/3/17 at 02:59 PM |
|
|
zzr1100 clutch line
I'm using a the standard zzr1100 master cylinder, operated by the pedal and a couple of rose joints.
The length of the clutch line is quite a lot longer than standard. probably 2.5 metres.
I'm not very familiar with banjo bolts, so can anyone suggest the cheapest way of connecting the two ends? I think both on the 1100 are 10mm
banjo.
|
|
|
|
|
russbost
|
| posted on 1/3/17 at 05:12 PM |
|
|
Link
I no longer run Furore Products or Furore Cars Ltd, but would still highly recommend them for Acewell dashes, projector headlights, dominator
headlights, indicators, mirrors etc, best prices in the UK! Take a look at http://www.furoreproducts.co.uk/ or find more parts on Ebay, user names
furoreltd & furoreproducts, discounts available for LCB users.
Don't forget Stainless Steel Braided brake hoses, made to your exact requirements in any of around 16 colours.
http://shop.ebay.co.uk/furoreproducts/m.html?_dmd=1&_ipg=50&_sop=12&_rdc=1
|
NOTE:This user is registered as a LocostBuilders trader and may offer commercial services to other users
|
nick9one1
|
| posted on 2/3/17 at 11:39 AM |
|
|
perfect! thank you
|
|
|
