MsD
|
posted on 22/1/13 at 06:16 PM |
|
|
WTD- bonnet catches.
im after 2x of these catches.
What ya got?
Thanks in advance,
Mark.
[Edited on 22/1/13 by MsD]
|
|
|
AndyW
|
posted on 22/1/13 at 06:35 PM |
|
|
why not just order them from kitspares??
|
|
MsD
|
posted on 22/1/13 at 06:40 PM |
|
|
I ordered a pair from them last year.. had them sat in the garage for ages then decided i wasnt going to use them so sold them on...
Im just being tightfisted and dont wanna pay full price again!
Mark.
|
|
Stott
|
posted on 22/1/13 at 06:58 PM |
|
|
I used protex stainless over centre catches with the locking tab so they stick down, and also an r clip through the hole in them.
For IVA I removed the r clips and used rubber covers that Caterham sell for £2 each and strech on to the catches, the tester was happy with this as
"Caterham use them"
Plus I won't lose my bonnet anytime soon
|
|
swanny
|
posted on 22/1/13 at 07:25 PM |
|
|
Pity I've got a set if the other rubber ones (the ones with the t-bar rubber Bit) sitting used in my garage. You defrost want this sort.
|
|
wicket
|
posted on 22/1/13 at 08:26 PM |
|
|
Got mine form RS here
http://uk.rs-online.com/web/p/toggle-latches/2888464/
|
|
Not Anumber
|
posted on 22/1/13 at 08:39 PM |
|
|
Ive got 3 pairs of these on mine for some reason and think they are unsightly, fiddly things and really can'tunderstand why anyone would put up
with them except for the IVA. I'm going to hinge the bonnet at the scuttle with a pair of stainless TR2 hinges and will be looking to use
concealled bonnet pins at the front and just one pair of stainless catches at the sides.
|
|
wicket
|
posted on 22/1/13 at 08:51 PM |
|
|
Each to their own, but mine are fine certainly not fiddly and do the job very well.
|
|
RK
|
posted on 22/1/13 at 10:26 PM |
|
|
Toggle &' clip fastener, hooks, for cases, boxes, bonnets, boots, ducting ( 2 no)
don't know if they'll work or not, but the price is pretty good! It isn't what I have used.
These are what you want, whether you know it now or not:
STAINLESS STEEL FIA APPROVED MOTORSPORT BOOT / BONNET HOOKS SPRINGS MLR.IN
[Edited on 22/1/13 by RK]
|
|