Printable Version | Subscribe | Add to Favourites
<<  1    2  >>
New Topic New Poll New Reply
Author: Subject: Sale of unstarted project
scutter

posted on 19/3/19 at 05:54 PM Reply With Quote
Sale of unstarted project

Due to a drastic change in circumstances. my Alfa V6 Haynes roadster if up for sale.

I'm currently having trouble uploading photos, but if there's anything you think you may need just shout and see if I've got it.

I'm very willing to break the car, which can be found in my photo archive under MD7.

Full Haynes Roadster chassis,
Front and rear suspension including rose jointed rear lower wishbones to adjust toe.
Protech alloy dampers.
Full loom.
Digidash II system.
Full car set of lights.
Wilwood midilite calipers, Cosworth 285 x-drilled and grooved discs, mintex 1144 pads
Cobra 7 seats X2

Unique bits,

Alfa Romeo 3 litre Busso engine, rebuilt, high compression heads. Haynes built Exhaust with 7"silencers and switchable race cats, straight pipes.

Cosworth T5 gearbox with modified bellhousing to bolt direct to the Busso engine/.

The only thing sold so far is the Megasquirt and O2 sensor.

Kind Regards Dan.





The less I worked, the more i liked it.

Is this a TRADE ADVERTISEMENT?? Click HERE to report it!

View User's Profile E-Mail User Visit User's Homepage View All Posts By User U2U Member
wowblaauw

posted on 19/3/19 at 08:53 PM Reply With Quote
Willwood Calipers, Discs and Pads

Hi, I’m interested in your Willwood Calipers, discs and pads. PM sent





"Life should NOT be a journey to the grave with the intention of arriving safely in an attractive and well preserved body, but rather to skid in sideways, chocolate in one hand, wine in the other, body thoroughly used up, totally worn out and screaming...
Damn, What a ride!!"

View User's Profile View All Posts By User U2U Member
martin62

posted on 20/3/19 at 07:51 AM Reply With Quote
Protech Shocks

I am interested in the Protech Shocks PM sent.
View User's Profile View All Posts By User U2U Member
Mark100

posted on 26/3/19 at 10:19 AM Reply With Quote
price for seats thanks
View User's Profile View All Posts By User U2U Member
scutter

posted on 26/3/19 at 11:41 AM Reply With Quote
£100 collect from nr18

Dan.





The less I worked, the more i liked it.

View User's Profile E-Mail User Visit User's Homepage View All Posts By User U2U Member
Mr Whippy

posted on 26/3/19 at 12:38 PM Reply With Quote
drastic change in circumstances? sounds interesting...
View User's Profile E-Mail User Visit User's Homepage View All Posts By User U2U Member
PaulYDP

posted on 26/3/19 at 01:29 PM Reply With Quote
Could you U2U me a price for the Digidash?

Cheers,
Paul

View User's Profile View All Posts By User U2U Member
scutter

posted on 26/3/19 at 02:43 PM Reply With Quote
quote:
Originally posted by Mr Whippy
drastic change in circumstances? sounds interesting...


Divorce will do that. &#128522;





The less I worked, the more i liked it.

View User's Profile E-Mail User Visit User's Homepage View All Posts By User U2U Member
big_wasa

posted on 26/3/19 at 04:50 PM Reply With Quote
Is the dash the etb digidash lite 2 ?

If so I am also interested in deetails.

Cheers

View User's Profile View All Posts By User U2U Member
scutter

posted on 26/3/19 at 05:10 PM Reply With Quote
Sorry folks Digidash sold yesterday and in the post.

Dan





The less I worked, the more i liked it.

View User's Profile E-Mail User Visit User's Homepage View All Posts By User U2U Member
scutter

posted on 27/3/19 at 01:56 PM Reply With Quote
Hopefully these photos will upload after a morning on Imgur.

Chassis, £250. All wishbones, hubs, steering column and rack, lowered floors, CDS rollbar, fuel tank a few misc. panels. No Dampers as sold.
















Sierra 3.64 LSD with driveshafts £250



Dezent 15" alloys new Toyo tyres £150







Wilwood Midilite 284mm sierra Front set up inc. 1144 pads £300



Sierra rear calipers and discs £50



Pedal box, balance bar, 3 master cylinders, 1 IVA reservoir, 3 single reservoir cable bias adjuster. £150





Oil cooling set up,take off plate, remote filter housing, thermostat valve and cooler. £100





Westfield screen mounts £25





Alloys sheets, 1.5mx3mx1.2mm and 2 4'x12'x16 gauge £100 Collect only






Seats Cobra roadster 7s, no harness holes, 2 tear in a seat £100





Bodywork set, Will need painting, high level nosecone£200











Electric set up complete, No steering column or wheel. MX5 switch gear £400









Fire extinguisher exhausts 7" diameter. need centre perforated tube, mounts, come with 100cpi cats. fist sold will get exhaust wadding £30 each







AL-KO 1.3ton trailer axle. £75





All items in NR18, large/heavy items are collect. Thanks for looking. Dan

[Edited on 27/3/19 by scutter]

[Edited on 27/3/19 by scutter]





The less I worked, the more i liked it.

View User's Profile E-Mail User Visit User's Homepage View All Posts By User U2U Member
jps

posted on 27/3/19 at 09:07 PM Reply With Quote
You're in Wymondham, Norfolk - or thereabouts then?

I could be interested in the wheels/tyres - how long have the tyres been on them, what width are they, what PCD are they, and what offset?

[Edited on 27/3/19 by jps]

View User's Profile Visit User's Homepage View All Posts By User U2U Member
scutter

posted on 27/3/19 at 11:15 PM Reply With Quote
quote:
Originally posted by jps
You're in Wymondham, Norfolk - or thereabouts then?

I could be interested in the wheels/tyres - how long have the tyres been on them, what width are they, what PCD are they, and what offset?

[Edited on 27/3/19 by jps]


Suton just south of Wymondham, I'll have to look at them on sat when I'm back on the farm.

Dan.





The less I worked, the more i liked it.

View User's Profile E-Mail User Visit User's Homepage View All Posts By User U2U Member
big_wasa

posted on 28/3/19 at 07:06 PM Reply With Quote
Have the front brake sold Dan ?
View User's Profile View All Posts By User U2U Member
scutter

posted on 28/3/19 at 09:07 PM Reply With Quote
Front brakes still available buddy. Dan





The less I worked, the more i liked it.

View User's Profile E-Mail User Visit User's Homepage View All Posts By User U2U Member
scutter

posted on 2/4/19 at 08:04 PM Reply With Quote
My apologies to everyone for the delay in messaging them. Now all answered.

I'm away from the farm until the week after easter now, starting the 23rd April. So any purchases will be posted after that.

Regards Dan





The less I worked, the more i liked it.

View User's Profile E-Mail User Visit User's Homepage View All Posts By User U2U Member
scutter

posted on 25/4/19 at 05:28 PM Reply With Quote
Final Bump before being listed on Ebay.

Dan.





The less I worked, the more i liked it.

View User's Profile E-Mail User Visit User's Homepage View All Posts By User U2U Member
HowardB

posted on 25/4/19 at 07:18 PM Reply With Quote
what's left?





Howard

Fisher Fury was 2000 Zetec - now a 1600 (it Lives again and goes zoom)

View User's Profile View All Posts By User U2U Member
CeeBee

posted on 7/5/19 at 11:34 AM Reply With Quote
Windscreen Pillars

Hi There Scutter,

I'd be very interested in the Westfield Windscreen pillars if still available?

Regards

Chris

View User's Profile View All Posts By User U2U Member
wrayvon

posted on 7/5/19 at 02:49 PM Reply With Quote
Are the sierra rear calipers still available by any chance?

And the red top battery...?

Thanks

[Edited on 7/5/19 by wrayvon]

View User's Profile View All Posts By User U2U Member
1960dave

posted on 8/5/19 at 07:16 PM Reply With Quote
Has the exhaust sold yet
View User's Profile View All Posts By User U2U Member
scutter

posted on 9/5/19 at 11:50 AM Reply With Quote
Sorry for the delay, laptop issues and I can't get on with the site on my phone.

Definitely sold are;

Dash.
Dampers.
Front and rear brakes.
Battery.

Provisionally sold are;

Seats.
One exhaust
Screen mounts.

Haven't had time to list on Ebay due to shift work, so everything else is still available.

Regards Dan





The less I worked, the more i liked it.

View User's Profile E-Mail User Visit User's Homepage View All Posts By User U2U Member
wowblaauw

posted on 9/5/19 at 02:21 PM Reply With Quote
Hi Dean,

You have listed the following:

Oil cooling set up,take off plate, remote filter housing, thermostat valve and cooler. £100

Can I buy the thermostat on its own?

Cheers

Craig





"Life should NOT be a journey to the grave with the intention of arriving safely in an attractive and well preserved body, but rather to skid in sideways, chocolate in one hand, wine in the other, body thoroughly used up, totally worn out and screaming...
Damn, What a ride!!"

View User's Profile View All Posts By User U2U Member
scutter

posted on 9/5/19 at 02:46 PM Reply With Quote
Yes buddy, £50 posted.

Dan.





The less I worked, the more i liked it.

View User's Profile E-Mail User Visit User's Homepage View All Posts By User U2U Member
wowblaauw

posted on 9/5/19 at 03:26 PM Reply With Quote
U2 sent pal





"Life should NOT be a journey to the grave with the intention of arriving safely in an attractive and well preserved body, but rather to skid in sideways, chocolate in one hand, wine in the other, body thoroughly used up, totally worn out and screaming...
Damn, What a ride!!"

View User's Profile View All Posts By User U2U Member
<<  1    2  >>
New Topic New Poll New Reply


go to top






Website design and SEO by Studio Montage

All content © 2001-16 LocostBuilders. Reproduction prohibited
Opinions expressed in public posts are those of the author and do not necessarily represent
the views of other users or any member of the LocostBuilders team.
Running XMB 1.8 Partagium [© 2002 XMB Group] on Apache under CentOS Linux
Founded, built and operated by ChrisW.