bi22le
|
| posted on 1/6/20 at 06:26 PM |
|
|
Dismantling an ETB DD2 Lite dash
About 3 years ago I bought a "working" DD2 Lite from eBay.
Either since then, or knowingly sold like it by the seller, button A is stuck down.
I could try and send this back to ETB, infact they are based on the same estate as my company, or I could fix it myself.
These are very well made bits of kit though and I can't see anyway into it to try and replace the button.
Anyone dismantled one before? I don't want to be picking off the front membrain if that is not the way in!
Track days ARE the best thing since sliced bread, until I get a supercharger that is!
Please read my ring story:
http://www.locostbuilders.co.uk/forum/13/viewthread.php?tid=139152&page=1
Me doing a sub 56sec lap around Brands Indy. I need a geo set up! http://www.youtube.com/watch?v=EHksfvIGB3I
|
|
|
|
|
loggyboy
|
| posted on 1/6/20 at 07:02 PM |
|
|
I looked at this as wanted to change led colours, they appeared to be adhesive sealed so didnt bother.
Mistral Motorsport
|
|
|
bi22le
|
| posted on 1/6/20 at 10:00 PM |
|
|
Update:
I think I have fixed the button. I managed to pick out the rubber seal that covers the switch and keep moving it whxi seems to have stopped it from
sticking.
That will do for now anyway.
Track days ARE the best thing since sliced bread, until I get a supercharger that is!
Please read my ring story:
http://www.locostbuilders.co.uk/forum/13/viewthread.php?tid=139152&page=1
Me doing a sub 56sec lap around Brands Indy. I need a geo set up! http://www.youtube.com/watch?v=EHksfvIGB3I
|
|
|
