Board logo

twin axle brian james trailer for sale
daniel mason - 19/10/13 at 07:45 PM

just got a covered trailer so my twin axle minno is up for sale. tows superb with great tyres and brakes! (both axles braked)
spec includes.
2 x braked axles,
4 x good tyres and a new spare wheel
handbrake,
lockable hitch,
rear legs for loading and un-loading when un-hitched from tow car,
whinch,
low level tyre rack for ample storage.( i carry 6 wheels/tyres and tool chest)
long ramps for low cars. ( i can get the radical on it)

after £1100 but no offers at £1000 to lcb member.before ebay.they usually sell for way more in far worse condition! cheers

johnny chimpo - 19/10/13 at 07:51 PM

What's the bed size?

daniel mason - 19/10/13 at 07:54 PM

i know its 1.65 m wide but unsure of length. a 7 will fit length wise easily as my old mnr went on my previous trailer which was way shorter. my mnr ran wide rears though so not sure of width. id guess the bed is 11' ish

johnny chimpo - 19/10/13 at 07:57 PM

Ah doh! Sorry was interested but it's too narrow for the MNR

daniel mason - 19/10/13 at 08:03 PM

thats surprising. as the ADR went on and that was wide!

johnny chimpo - 19/10/13 at 08:35 PM

I will check the width in the morning, but suspect its roughly 170cm wide at the rear :-(

daniel mason - 19/10/13 at 08:38 PM

the mnr must be massive! the caterham would have had inches to spare,as does the radical!

johnny chimpo - 19/10/13 at 08:41 PM

This is why im struggling so much getting a trailer....

Just looked at your MNR build blog, looks like the trailer you used to transport that was just the right size. Dont suppose you know what the bed dimensions of that were?

Sorry again for taking your posts off topic!

daniel mason - 19/10/13 at 08:57 PM

no idea but in reality it was way too short! no room for tyres or tools and length wise,it was touch and go!

rdodger - 19/10/13 at 09:53 PM

I would imagine the MNR will be 1675 if it uses Sierra rear end.

daniel mason - 19/10/13 at 10:09 PM

depends on rear wheel widths and offsets! caterham had ford sierra 7" diff and push in shafts but went on easy!

amalyos - 20/10/13 at 06:52 AM

Mine is a 1.9mtr bed width. You won't get away with anything much smaller. Its a std MNR rear, with 205 front and rear.

rdodger - 20/10/13 at 09:34 AM

quote:
Originally posted by daniel mason
depends on rear wheel widths and offsets! caterham had ford sierra 7" diff and push in shafts but went on easy!


The Caterham has shorter drive shafts and much narrower track width.

I was only trying to point out that MNR, MK, MAC#1 etc used full size Sierra which would give 1675 ish with standard offset wheels in 7" (ET35)

unijacko67 - 20/10/13 at 09:10 PM

Here's the ad, with all the sizes on ebay. Not my trailer, but I know its a good one.

BRIAN JAMES TWIN AXLE MINNO TRAILER FOR SALE.FOR RADICAL CATERHAM WESTFIELD KIT

[Edited on 20/10/13 by unijacko67]

daniel mason - 20/10/13 at 09:25 PM

thanks andrew. i still dont know how to add links! must try harder

unijacko67 - 20/10/13 at 09:50 PM

All I do is copy the url at the top (right click then copy) of the page of the ad, in this case your ebay ad page and paste it in my reply(right click then paste). Try it.

daniel mason - 26/10/13 at 03:02 PM

SOLD! thanks