Board logo

3 in 1 dc Tig, stick, plasma cutter for sale
big_wasa - 4/4/18 at 06:38 AM

Spring is here and it's time for the annual cull of bits and bobs left over from old projects to make space for the new.

For sale is my trusty little German badged Chinese dc Tig welder.

It's a 3 in 1 so has tig, stick and plasma cutting functions.

It has Hf start and is I think 160a and has all the leads and even the instructions and comes on the welding cart.
It can be demonstrated in any of its functions but does not come with any gas bottle or regulator.

Price is 150 ovno. Cash on collection only and I am located near Spalding lincs.

Edit, to use the plasma you will need a compressor.

[Edited on 4/4/18 by big_wasa]

big_wasa - 4/4/18 at 06:41 AM

ianhurley20 - 4/4/18 at 07:58 AM

Hi Warren - if its one that you can use a 3 pin plug on put me down for first dibs please.
Are you in at home Thursday?

big_wasa - 4/4/18 at 08:14 AM

Yes mate it's single phase and I just run it of a standard 13a 3 pin plug.

If I was running it at full chat for long I would probably run it on the cooker circuit.

I am really busy at work. It would need to be after 6 or weekends mate.

Cheers Warren

[Edited on 4/4/18 by big_wasa]

Wheels244 - 4/4/18 at 08:23 AM

Can I have 2nd dibs please.



ianhurley20 - 4/4/18 at 08:36 AM

Ok thanks Warren - I'll sort something out for the weekend and send you a pm to sort out times and where

ianhurley20 - 4/4/18 at 09:21 AM

PM or U2U sent

big_wasa - 4/4/18 at 10:51 AM

Will do Rob but provisionally sold.

Thanks for the interest.