Printable Version | Subscribe | Add to Favourites
New Topic New Poll New Reply
Author: Subject: help measurements zx10r engine
INDY BIRD

posted on 20/2/17 at 07:26 PM Reply With Quote
help measurements zx10r engine

Hi all

Anyone got a zx10r engine just need some measurements if possible,

For exhaust port diameter (ID) and what the hole centres are between ports,

Thanks for any help

indybird

View User's Profile View All Posts By User U2U Member
Toprivetguns

posted on 20/2/17 at 07:45 PM Reply With Quote
Any excuse to jump into the garage - will have a look now.

Its a 2005 engine if that's ok?





Only drive as fast as your angel can fly... !

View User's Profile View All Posts By User U2U Member
Toprivetguns

posted on 20/2/17 at 08:00 PM Reply With Quote
42.4mm ID of exhaust port
82mm hole centres between ports





Only drive as fast as your angel can fly... !

View User's Profile View All Posts By User U2U Member
INDY BIRD

posted on 20/2/17 at 08:30 PM Reply With Quote
Perfect thanks for your assistance, and at least it's not too cold tonight
View User's Profile View All Posts By User U2U Member

New Topic New Poll New Reply


go to top






Website design and SEO by Studio Montage

All content © 2001-16 LocostBuilders. Reproduction prohibited
Opinions expressed in public posts are those of the author and do not necessarily represent
the views of other users or any member of the LocostBuilders team.
Running XMB 1.8 Partagium [© 2002 XMB Group] on Apache under CentOS Linux
Founded, built and operated by ChrisW.