Printable Version | Subscribe | Add to Favourites
New Topic New Poll New Reply
Author: Subject: Pinto transmission question
FastBarney

posted on 17/8/20 at 09:54 PM Reply With Quote
Pinto transmission question

Hey Guys,
For my project i am looking for a other pinto engine.
I found a good engine but it has a automatique gearbox.
Kan use That engine in the type 9 that is in the car.
If i swap the clutch and flywheel?
Thanks

View User's Profile View All Posts By User U2U Member This User Has MSN Messenger
theconrodkid

posted on 18/8/20 at 06:18 AM Reply With Quote
short answer is yes, you just need to put a spigot bearing in the back of the crank
other things like starter, carb, dizzy and cam may be different but thats no biggy.

[Edited on 18/8/20 by theconrodkid]





who cares who wins
pass the pork pies

View User's Profile E-Mail User View All Posts By User U2U Member   theconrodkid 's Aim   theconrodkid 's Yahoo
rusty nuts

posted on 18/8/20 at 06:32 AM Reply With Quote
As Conroe says . I have in the past changed engines ( not Pinto I must say) from auto to manual, sometimes there is a bush you have to remove in order to fit the spigot bush
View User's Profile View All Posts By User U2U Member

New Topic New Poll New Reply


go to top






Website design and SEO by Studio Montage

All content 2001-16 LocostBuilders. Reproduction prohibited
Opinions expressed in public posts are those of the author and do not necessarily represent
the views of other users or any member of the LocostBuilders team.
Running XMB 1.8 Partagium [ 2002 XMB Group] on Apache under CentOS Linux
Founded, built and operated by ChrisW.