ttalps2000
|
| posted on 22/2/18 at 09:29 AM |
|
|
Dunnell ECU
Does anyone have any experience of the Dunnell CFMS ECU that they offer with their throttle body setups?
Cant seem to find the ECU available as a separate item on their site, so not sure if you can purchase it separately.
|
|
|
|
|
cliftyhanger
|
| posted on 22/2/18 at 09:39 AM |
|
|
I had one, but they are locked so only they can map them. Hence I think only available as a package, and come mapped to match.
Probably available elsewhere unmapped.....
|
|
|
ttalps2000
|
| posted on 22/2/18 at 09:49 AM |
|
|
Any idea who they are produced by? I would assume they are private labelling them
|
|
|
big_wasa
|
| posted on 22/2/18 at 12:22 PM |
|
|
The older ignition only ecu I had from them was I believe from an Australian manufacture.
If you just want an ecu I would look elsewhere, if you want to invest in there pedigree then I found them great to deal with. As said the ecu is
locked but if your upgrading to the next level then they would have it back to 're program it.
|
|
|
ttalps2000
|
| posted on 22/2/18 at 12:26 PM |
|
|
It is looking at the options out there really. The dunnell products are bloody brilliant, you cant fault the stuff they do.
I have the throttle bodies but just need the ECU side of things. Omex is the way to go, but your looking at about £1k by the time you have bought all
the sensors, harness etc.
|
|
|
cliftyhanger
|
| posted on 22/2/18 at 06:02 PM |
|
|
Probably rather cheaper than Dunnell setup. About 3.5K IIRC....
Don't bother with them if cost is a consideration.
|
|
|
