Hi

I have a electrical oil pressure gauge and a seperate an oil pressure warning light on my Acewell digidash, can I run both of these from one oil pressure sender. Currently I have these on individual senders, but I want to make room for a oil temp sensor without having multiple tee pieces.

Thanks
Charlie

you can get combined pressure sender and switch
eg: this 'esps' unit
http://www.enovationcontrols.eu/products/electric_gauge/electric_gauge_sensors_esps_ests.htm
http://www.enovationcontrols.eu/pdf/ys6490.pdf

Thats great thanks, I'm have problems finding some where to buy one from.

Etb instruments do a combined one give them a ring for the spec

Other option is to mount one of the sensors somewhere else. The temperature sensor can go into the sump easily enough - either drill and tap or simply replace the drain plug.