Printable Version | Subscribe | Add to Favourites
New Topic New Poll New Reply
Author: Subject: Hayabusa help
goaty

posted on 17/2/18 at 09:37 PM Reply With Quote
Hayabusa help

Hi
Got a project, it had already been working but the wiring was a mess.
Since rebuilding the car I have no an issue with what wires do what.
Loom has been adapted already but I am a little lost.

What would be power into the ecu? Orange/white?

Yellow/green, go to earth?

Black/green...no idea on this one.

Starter is wired independent from the engine loom so I can turn it over but need to sort the ecu side of it.

Hoping someone on here has the knowledge.

Cheers guys

View User's Profile View All Posts By User U2U Member
bart

posted on 18/2/18 at 12:50 AM Reply With Quote
yellow green is not earth defo black is

but !
depends on year of loom
uk or usa
what about the neutral and clutch switch ?
is the alarm plug wiring still there
if it a later loom be careful as there are black live wires as well, and black indicator wires.

some pics might help and more info





BE ALERT > BRITAIN NEEDS LERTS

View User's Profile View All Posts By User U2U Member
ReMan

posted on 18/2/18 at 12:53 AM Reply With Quote
any help?
http://www.team-moto.com/HayabusaWireHarness.jpg





www.plusnine.co.uk
∙،°. ˘Ô≈ôﺣ

View User's Profile Visit User's Homepage View All Posts By User U2U Member
goaty

posted on 18/2/18 at 08:22 AM Reply With Quote
I have a diagram, which I think is correct one but still a bit lost.

Loom has been stripped back by previous owner so prob got a max of 9 wires left loose.

Neutral is blue and is working.

Yellow/green I though I had read somewhere to earth to act as clutch switch bypass...left loose for the min.

Orange/white I have as ignition live.

Not sure which should feed the switch side of my fuel pump relay.

Black/green I have left loose as no idea on that one.

Orange/yellow (from memory) is earthed via a 100k resistor

View User's Profile View All Posts By User U2U Member
goaty

posted on 18/2/18 at 05:04 PM Reply With Quote
Just looked and these are the only wires I have that need connecting by the looks for the engine loom.
Orange/Yellow (have 100k resistor to earth)
Yellow/blue (tacho)
Blue (neutral light)
Yellow/green
Orange/white
Black/green
Black/yellow

Tip over switch is in place still.

Hopefully someone can help

View User's Profile View All Posts By User U2U Member

New Topic New Poll New Reply


go to top






Website design and SEO by Studio Montage

All content © 2001-16 LocostBuilders. Reproduction prohibited
Opinions expressed in public posts are those of the author and do not necessarily represent
the views of other users or any member of the LocostBuilders team.
Running XMB 1.8 Partagium [© 2002 XMB Group] on Apache under CentOS Linux
Founded, built and operated by ChrisW.