Description


Description



You've all seen these before, turn the handle or use a drill and it goes up and down, give it a shove and it tilts backwards and forwards. In Hyde, Cheshire, SK14 £275.

[Edited on 20/12/15 by rotax78]

been seriously looking at one of these for my haynes roadster, have you had your car on this or just normal cars?
would it fit on a pallet and would you send it?

I don't have the MK anymore so I don't know. The overall dimensions are approx 1300mm x 1500mm. The approx distance between the sill plates is 1190mm (inside to inside) and approx 1540mm (outside to ouside) when folded flat it stands approx 150mm high. It has a capacity of 1500kg. I really wanted it collected, maybe drop off if local.

[Edited on 20/12/15 by rotax78]

[Edited on 20/12/15 by rotax78]

It's too wide for a seven but I bought one and cut 12" out of the frame which was an hours work so it fits both my cars .

Always managed fine with a low trolley jack and axle stands with my MK Indy.


ETA...maybe because I already had them to hand though.

[Edited on 21/12/15 by nick205]

When I do my yearly waxoyl touch up on the kitten I tilt it fully each way and sit on a little mechanics stool with a pot and brush . No more waxoyl in the face

quote:

---

Originally posted by froggy
When I do my yearly waxoyl touch up on the kitten I tilt it fully each way and sit on a little mechanics stool with a pot and brush . No more waxoyl in the face

---