Printable Version | Subscribe | Add to Favourites
New Topic New Poll New Reply
Author: Subject: Fury rear wishbone outer pivot bolt 1/2"
Markymark

posted on 3/12/17 at 11:58 AM Reply With Quote
Fury rear wishbone outer pivot bolt 1/2"

Hi guys

I'm sure I didn't dream this but can't seem to find it, someone posted about pivot bolts in 1/2 inch and said they couldn't get any.

Well, went to see Steve at Fury on Thursday, mentioned I needed some, pulled 2 out of a bin on the wall and gave them to me.

So in short Steve does have them after all

Hope you see this post and you get sorted

Mark

View User's Profile View All Posts By User U2U Member
joneh

posted on 3/12/17 at 01:06 PM Reply With Quote
Got mine from Arun fasteners.
View User's Profile View All Posts By User U2U Member
Markymark

posted on 3/12/17 at 01:32 PM Reply With Quote
Hi joneh (predictive text just called you honey!)

Was it you who asked the original question, as at the moment I'm doubting my memory!

Will keep them in mind if I need anything else

Mark

View User's Profile View All Posts By User U2U Member
joneh

posted on 3/12/17 at 01:48 PM Reply With Quote
No not me. Got all my bolts a few years ago.
View User's Profile View All Posts By User U2U Member
bi22le

posted on 3/12/17 at 03:49 PM Reply With Quote
Changing them, and all other wishbone bolts made a difference Tommy cars handling. It seemed to tighten it all up and gave me more confidence as I had better predictability.





Track days ARE the best thing since sliced bread, until I get a supercharger that is!

Please read my ring story:
http://www.locostbuilders.co.uk/forum/13/viewthread.php?tid=139152&page=1

Me doing a sub 56sec lap around Brands Indy. I need a geo set up! http://www.youtube.com/watch?v=EHksfvIGB3I

View User's Profile View All Posts By User U2U Member
nick205

posted on 4/12/17 at 11:15 AM Reply With Quote
quote:
Originally posted by bi22le
Changing them, and all other wishbone bolts made a difference Tommy cars handling. It seemed to tighten it all up and gave me more confidence as I had better predictability.



Out of interest, what bolts did you change them to?

View User's Profile View All Posts By User U2U Member
joneh

posted on 4/12/17 at 11:57 AM Reply With Quote
I might be mixing my posts up here - but essentially the Fury Chassis had Metric holes on the Chassis but the MK2 Escort used imperial bushes. You're left with 0.7mm wiggle room on each bolt which adds up.

I had to ream my Chassis to take the imperial bolts.

Edit - This might not apply to the later Sierra chassis that the OP is talking about...

[Edited on 4/12/17 by joneh]

View User's Profile View All Posts By User U2U Member
martin500

posted on 4/12/17 at 08:25 PM Reply With Quote
quote:
Originally posted by Markymark
Hi guys

I'm sure I didn't dream this but can't seem to find it, someone posted about pivot bolts in 1/2 inch and said they couldn't get any.

Well, went to see Steve at Fury on Thursday, mentioned I needed some, pulled 2 out of a bin on the wall and gave them to me.

So in short Steve does have them after all

Hope you see this post and you get sorted

Mark


It might have been me on the JPSC forum? Steve only had 12mm at the time but he contacted me later to say he was getting some in so sorted.

Thanks,

Martin

View User's Profile View All Posts By User U2U Member
Markymark

posted on 4/12/17 at 09:35 PM Reply With Quote
Hi Martin

Thanks for the reply, glad you got it sorted.

That's why I couldn't find it when I searched, could have sworn it was on here!

At least I'm not going too senile

Mark

View User's Profile View All Posts By User U2U Member
bi22le

posted on 4/12/17 at 10:58 PM Reply With Quote
quote:
Originally posted by nick205
quote:
Originally posted by bi22le
Changing them, and all other wishbone bolts made a difference Tommy cars handling. It seemed to tighten it all up and gave me more confidence as I had better predictability.



Out of interest, what bolts did you change them to?


I swapped out all of my metric bolts for Imperial ones. A good year or so back someone asked what lengths and provided an annotated picture to identify locations. Have a search to find out.

I also had to by a 1/2" drill bit to reem out the holes on the chassis.





Track days ARE the best thing since sliced bread, until I get a supercharger that is!

Please read my ring story:
http://www.locostbuilders.co.uk/forum/13/viewthread.php?tid=139152&page=1

Me doing a sub 56sec lap around Brands Indy. I need a geo set up! http://www.youtube.com/watch?v=EHksfvIGB3I

View User's Profile View All Posts By User U2U Member

New Topic New Poll New Reply


go to top






Website design and SEO by Studio Montage

All content © 2001-16 LocostBuilders. Reproduction prohibited
Opinions expressed in public posts are those of the author and do not necessarily represent
the views of other users or any member of the LocostBuilders team.
Running XMB 1.8 Partagium [© 2002 XMB Group] on Apache under CentOS Linux
Founded, built and operated by ChrisW.