Board logo

Ford 4X4 CV joint / drive shaft - where to get one?
Steve Lovelock - 2/4/12 at 09:38 AM

Hello,

I have a ford sierra 4x4 diff and drive shafts on my Luego and I am getting a knocking/grinding noise when the rear suspension is fulled loaded in bends. I have no visable signs of wear and have replaced the wheel bearing so am beginning to think that the CV joint is worn.

Any ideas where I can get a CV joint for the XR4x4 or even a complete shaft as I can't find one anywhere?

Cheers
Steve


loggyboy - 2/4/12 at 09:44 AM

FORD SIERRA/SAPPHIRE REAR CV JOINT (100mm) (NEW) 82>'93 | eBay


richard thomas - 2/4/12 at 11:35 AM

quote:
Originally posted by loggyboy
FORD SIERRA/SAPPHIRE REAR CV JOINT (100mm) (NEW) 82>'93 | eBay


That's cheap! I seem to remember paying a lot more than that when I replaced mine (similar issues....)


ReMan - 2/4/12 at 11:58 AM

Blimey that is good value!


mcerd1 - 2/4/12 at 12:32 PM

I had to pay a couple of £ more than that to get mine reconditioned ! (couldn't find new ons at the time)



I've got a couple of old ones you could have for the cost of the postage
they are as they came off the donor and need a clean up (see old thread on here about taking them apart and rebuilding them...)


britishtrident - 2/4/12 at 03:19 PM

From your description it doesn't sound like a CV joint issue to me.


Steve Lovelock - 2/4/12 at 05:58 PM

That's interesting, I gave that company a call this morning and they said that they didn't have one, thanks.

Ok, so put me out of my misery britishtrident and tell what you think the problem is?