Board logo

breaking my haynes
Vmax1974 - 4/7/17 at 09:40 AM

Ok i am considering breaking my haynes as i have fallen out with the industry lately and think its time to move to other things for a while at least

So what interest would there be in parts

I must stress that i haven't made a final decision yet

I will break but if someone wants the lot then let me know

Haynes roadster bare book spec chassis

Haynes book spec wishbones

Alloy fuel tank made by k4kev over on haynes forum

2 x sierra diffs 1x push in with shafts 1x bolt on no shafts

2x pair of sierra front hubs with brake calipers and discs one pair untouched since coming off a sierra* 1 pair sold

1 pair Rear hubs and drums

Pair Haynes hear hub carrier

Escort steering rack 2.9 ratio *sold

Sierra column and steering wheel *sold

Set of after market 15" alloys 4 x 100 and 4 x 114 stud patterns with 4 good tyres not sure of et currently on the girlfriends car

Few other springs and hoses laying about

I will soon also be parting with my full set of haynes saturn moulds but some of these will need work

U2u with serious offers for the parts and i will make a decision based on offers

[Edited on 4/7/17 by Vmax1974]

[Edited on 4/7/17 by Vmax1974]

Vmax1974 - 4/7/17 at 11:37 AM

Wheels

nero1701 - 4/7/17 at 04:12 PM

interested in 1 set of sierra uprights with calipers and disks and Sierra column and steering wheel.

Can you give a price posted please

craigdiver - 4/7/17 at 06:19 PM

Interested in the fuel tank, any pics? How much you looking for?

Vmax1974 - 4/7/17 at 06:35 PM

Photos of the tank







craigdiver - 4/7/17 at 06:42 PM

Welding looks rough, has it been pressure tested?

Vmax1974 - 4/7/17 at 06:45 PM

Dont know i never made it

craigdiver - 4/7/17 at 07:24 PM

Am interested in the wishbones, any pics? And how much?

Vmax1974 - 4/7/17 at 07:33 PM

quote:
Originally posted by craigdiver
Am interested in the wishbones, any pics? And how much?


I will get some photos tomorrow they have surface rust so will need a clean up and paint and to my eye some of the welds (not mine) could do with dressing will be asking about £125 plus post for them

Vmax1974 - 4/7/17 at 07:53 PM










Vmax1974 - 5/7/17 at 05:22 PM

Any more interest before i start looking at ebaying it all

Vmax1974 - 7/7/17 at 02:31 AM

Here is an idea of prices

Haynes roadster bare book spec chassis £offers just get to get rid

Alloy fuel tank made by k4kev over on haynes forum £90

1 x sierra diffs push in £45* sold pending payment and collection

Pair of sierra push in shafts £30* sold pending payment and collection

1 x sierra diff bolt on no shafts £45

1x pair of sierra front hubs with brake calipers and discs untouched since coming off the donor bit rusty wire brush needed £60 pair * sold pending payment and collection

1 pair Rear hubs and drums £40

Pair Haynes rear uprights £30

Set of after market 15" alloys 4 x 100 and 4 x 114 stud patterns with 4 good tyres not sure of et £175

Handbrake with cables £20

Fuel pump facet posi-flo £10

[Edited on 7/7/17 by Vmax1974]

[Edited on 7/7/17 by Vmax1974]

[Edited on 8/7/17 by Vmax1974]

Vmax1974 - 8/7/17 at 07:10 AM

Add to the list is a pair of haynes book spec diff hangers with bolts

nye - 12/7/17 at 05:23 AM

I'll take the handbrake and cables

viceface - 12/7/17 at 09:54 AM

hi,

Are the push in shafts still for sale,
what length are the shafts, have they been shortened?
cheers.

Vmax1974 - 12/7/17 at 09:58 AM

quote:
Originally posted by viceface
hi,

Are the push in shafts still for sale,
what length are the shafts, have they been shortened?
cheers.


Push in shafts and associated diff sold sorry