Board logo

WTD: 100mm steel tube (approx 400mm long)
tegwin - 12/3/13 at 11:10 PM

As title really..

Does anyone have any mild steel or stainless tube approx 400mm long and 100mm in diameter?

owelly - 13/3/13 at 06:45 AM

I/D or O/D? What wall thickness?

tegwin - 13/3/13 at 08:53 AM

It is not too critical. 2-4mm wall thickness would be ok.

TAZZMAXX - 13/3/13 at 09:01 AM

I've got some 104mm o/d x 2mm wall or 4" x 14g both in stainless steel. Probably be about £15-£20 plus the postage if either of those is any good.

owelly - 13/3/13 at 10:30 AM

I have some 4" nominal bore steam pipe so probably 4mm wall thickness. Any good?

tegwin - 13/3/13 at 03:43 PM

Owelly, is that 100mm OD with (roughly)4mm walls?

[Edited on 13/3/13 by tegwin]

owelly - 13/3/13 at 05:21 PM

It's 4.1" I/D with 4mm wall (could be a bit thicker).

tegwin - 13/3/13 at 05:32 PM

Hmmm. Thanks for the offer but I think it's just too chunky.

Might have to resort to ebay for a 100mm ID with 3mm walls...

[Edited on 13/3/13 by tegwin]