Well after 6 years I is back. Jus bought a unfinished project haynes I wonder what joys I have. First choice is engine


[Edited on 13/2/17 by 24vseven]

Welcome back.
Engine choice? Easy, BMW M52B28 230bhp (with M50 minlet manifold) and fit like a glove

Now that looks snug.
I keep going through the usual. Duratec zetec Bec even considered v6 duratec
Just can decide lol

Vauxhall turbo


Engine Bay

quote:

---

Originally posted by 24vseven
Now that looks snug.
I keep going through the usual. Duratec zetec Bec even considered v6 duratec
Just can decide lol

---

That's gonna be fun lol

quote:

---

Originally posted by 24vseven
That's gonna be fun lol

---

I dont know if you have made a decision on the engine as yet and are working to a budget, but I have a complete 1800cc Zetec engine in the garage along with brand new clutch and fly wheel, alternator, ali pullys...

There is also a complete 4-1 exhaust system for a Duratec.

2 sets of Hi Spec Brake Calipers which are for the front with a Sierra, one set are silver and the other is black. The black set will come with Ferodo DS 2500 pads.

There is a full set front and rear EBC Yellow Pads for Hi Spec Calipers as well.

Other items are a set of Pro Tech Shocks with springs off a Tiger which are about 18 months old and used only for 2 track days and 4 race meetings, I will measure the length if interested.

3 ea 4" dia Head Lights standard tiger rear lights.

2 sets of 13" x 7" Pro Race 1.2 in gloss black, ford 108 ET 24

1 set of Caterham 8 spoke KN wheels in a gloss Anthracite finish - Front wheels are 13"x 6" Rear wheels 13"x 8" all Ford 108 PCD to be confirmed if interested.

There is also 2 sets of Yokohama A048's the soft set are still good for a couple of track days while the Mediums have about 4 mm tread left, plus a set of slick tyres if you fancy something for a track day.

There are many other items in the garage which are all left over from the various cars I have owned and upgraded at different times.

Contact me if anything takes your interest.

Gazza

quote:

---

Originally posted by garydavison


2 sets of Hi Spec Brake Calipers which are for the front with a Sierra, one set are silver and the other is black. The black set will come with Ferodo DS 2500 pads.

There is a full set front and rear EBC Yellow Pads for Hi Spec Calipers as well.

Other items are a set of Pro Tech Shocks with springs off a Tiger which are about 18 months old and used only for 2 track days and 4 race meetings, I will measure the length if interested.

---

Hi Nick P,

I have to go over to Siltech Racing tomorrow and measure the disc's and shocks for you....

I forgot to mention in the list that there is also a set of EBC disc's for the front and rear of car as I have changed to a non ventilated disc on the front to try and save another few grams and the rears have been changed to give a deeper bell as I am now running split rim wheels to give the offset I needed.

This is the web link for the EBC Disc's: http://www.ebcbrakeshop.co.uk/ebc-turbo-groove_c2918_23812923_192_307_34241.htm

Regards, Gazza

quote:

---

Originally posted by garydavison
Hi Nick P,

I have to go over to Siltech Racing tomorrow and measure the disc's and shocks for you....

I forgot to mention in the list that there is also a set of EBC disc's for the front and rear of car as I have changed to a non ventilated disc on the front to try and save another few grams and the rears have been changed to give a deeper bell as I am now running split rim wheels to give the offset I needed.

This is the web link for the EBC Disc's: http://www.ebcbrakeshop.co.uk/ebc-turbo-groove_c2918_23812923_192_307_34241.htm

Regards, Gazza

---

Well the decisions made. What's the asking price for the duratec 4-1 exhaust and possibly the shocks.

[Edited on 1/3/17 by 24vseven]

If the duratec will fit then so will the ecoboost


Ecoboost1

[Edited on 1/3/17 by sdh2903]