Board logo

ST170 VVT map
cliftyhanger - 26/10/19 at 07:48 PM

Has anybody got a 3d map for the VVT target advance?

I have never fiddles with the VVT map on mine, but I think it is not clever. According to the ME221 people, it should have loads of advance, 50 degress, at low revs, where as mine has low advance, maxing between 3500-4500.

They say:

(RPM -> CAM ADVANCE (degress))

0-1000 -> 0*
1000-2000 -> 50*
2000-3000 -> 40*
3000-4000 -> 50*
4000-5000 -> 30*
5000-5500 -> 20*
6000+ _> 10*

I could just use those figures, but that would be a 2D map. And I expect load will have an effect?

Whats the wisdom on this?


chris - 28/10/19 at 08:20 PM

i can email you pictures of my tunerstudio screen shots of 2d and 3d vvt tables


cliftyhanger - 29/10/19 at 05:42 AM

Many thanks, it will help me (hopefully) understand a bit more
I have sent a u2u...


Nickp - 29/10/19 at 06:20 AM

I just ran mine 2D with similar figures you posted there, lots of advance to start then backs off gradually as revs increase. Ran brilliantly and never felt the need to alter settings or go 3D tbh.


chris - 29/10/19 at 08:02 PM

i have emailed you some pictures hope they help