pekwah1
|
| posted on 28/12/10 at 10:52 PM |
|
|
Zetec Exhaust
Hi guys.
For those of you running a zetec, just wondered where you sourced your exhaust system from?
Is it more likely to get one fabricated as finding a suitable exhaust manifold looks pretty bleak...
Regards,
andy
|
|
|
|
|
dlatch
|
| posted on 29/12/10 at 12:26 AM |
|
|
maybe the Westfield kit will suit you?
http://www.westfield-sportscars.co.uk/shop/prodtype.asp?PT_ID=77&numRecordPosition=6&ph=cat&strKeywords=&&strSearchCriteria=
|
|
|
pekwah1
|
| posted on 29/12/10 at 12:28 AM |
|
|
christ! it would suit me if i was a rich bugger! i was looking for something a little more locost... i'll see if they do a manifold on its own
though...
|
|
|
pekwah1
|
| posted on 29/12/10 at 12:34 AM |
|
|
oh they do, still 300 nicker for it though.....
|
|
|
andkilde
|
| posted on 29/12/10 at 04:23 AM |
|
|
I'm cutting and shutting an ST170 maniflold -- it's 400 series stainless, so it'll still rust a bit but I think it'll look ok
with a bit of VHT on it. I had a free one kicking around but they should be reasonable from a breaker.
Cheers, Ted
|
|
|
RichardK
|
| posted on 29/12/10 at 09:17 AM |
|
|
What about the vindicator ones on eblag, hang on I'll get you a link....
LOCOST VINDICATOR SEVEN ZETEC 421 EXHAUST MANIFOLD KIT on eBay (end time 23-Jan-11 13:25:36 GMT)
LOCOST VINDICATOR SEVEN ZETEC 4-1 EXHAUST MANIFOLD KIT on eBay (end time 31-Dec-10 18:15:43 GMT)
Cheers
Rich
Gallery updated 11/01/2011
|
|
|
The Baron
|
| posted on 29/12/10 at 09:19 AM |
|
|
I got mine from GBS.
Very pleased with it.
B
|
|
|
AndyW
|
| posted on 29/12/10 at 11:21 AM |
|
|
GBS Have great service, i would highly recommend
GBS Link
|
|
|
pekwah1
|
| posted on 29/12/10 at 11:29 AM |
|
|
don't suppose you guys have got any photos of the actual gbs manifold and maybe some dimensions?
|
|
|
Andybarbet
|
| posted on 29/12/10 at 12:09 PM |
|
|
I got mine from a company called tube engineering near peterborough - they used to supply the old luego when they were based in peterborough.
Quality is very good and the whole system was reasonably priced.
Might be worth a phone call, they even polished the whole system for an extra tenner !
Give a man a fish & it will feed him for a day, give him a fishing rod & you've saved a fish.
|
|
|
big_wasa
|
| posted on 29/12/10 at 12:52 PM |
|
|
I got mine from fisher sports cars.
|
|
|
macc man
|
| posted on 29/12/10 at 03:14 PM |
|
|
I made my own due to lack of room on that side. Sounds great and not too expensive. Good luck.
|
|
|
Nash
|
| posted on 29/12/10 at 07:15 PM |
|
|
I had mine done at Powerspeed in Ashford Kent.
Great job as I wanted it inside the engine bay and I also wanted it free flowing to get the best out of the engine.
I'm pleased.
HTH's
.........Neil
It's What You Do Next That Counts.
Build It, Buy It, Drive It:
Southern Kit Car Club
|
|
|
