Printable Version | Subscribe | Add to Favourites
<<  1    2    3  >>
New Topic New Reply
Author: Subject: St170 to Mazda rx8 gearbox.
Pigsy

posted on 10/6/19 at 06:02 PM Reply With Quote
Sound logic and a good price to boot. The MG is a lot lighter than the Focus. About two thirds the weight. I am running ~Suzuki itb's which might give it 190bhp at a push.

Thanks again.

View User's Profile View All Posts By User U2U Member
big_wasa

posted on 10/6/19 at 06:36 PM Reply With Quote
Yeh but only around 150ft/lb torque.

They slip on a turbo Zetec putting out 220~250ft/lb +

View User's Profile View All Posts By User U2U Member
Pigsy

posted on 10/6/19 at 07:38 PM Reply With Quote
I think I will be ok. Not much of a tyre fryer. I’m not blowing the engine or anything like that.
View User's Profile View All Posts By User U2U Member
Pigsy

posted on 11/6/19 at 07:12 AM Reply With Quote
st170: Max torque (lb ft @ rpm) 144 @ 5500.
View User's Profile View All Posts By User U2U Member
Pigsy

posted on 11/6/19 at 07:18 AM Reply With Quote
The clutch will take 132 ft/lb in the mondeo 4x4
View User's Profile View All Posts By User U2U Member
Pigsy

posted on 11/6/19 at 05:16 PM Reply With Quote
I missed that clutch kit. Will an RS Turbo Ford CVH 220mm fit? its a 220mm diameter. ive seen one at a reasonable price.
View User's Profile View All Posts By User U2U Member
Pigsy

posted on 11/6/19 at 05:27 PM Reply With Quote
The 220mm is not the clutch diameter but the flywheel diameter. Forget I asked.
View User's Profile View All Posts By User U2U Member
big_wasa

posted on 11/6/19 at 05:35 PM Reply With Quote
Your making hard work off this for your self.

The 220mm cover plate isn’t going to mount to a 240mm flywheel. Have a look at some on line photos and you will see why.

View User's Profile View All Posts By User U2U Member
Pigsy

posted on 11/6/19 at 05:41 PM Reply With Quote
Hi. I realised as soon as i asked, hence my last comment. Im just want to be sure that what I fit will take the torque and hp. Im just learning what is best, all be it slowly. I know 60's and 70's fords, not later. Thanks for helping.
View User's Profile View All Posts By User U2U Member
big_wasa

posted on 11/6/19 at 05:48 PM Reply With Quote
I would prefer a brand name but knock of postage and it doesn’t get any cheaper

https://www.ebay.co.uk/itm/NEW-CLUTCH-KIT-FOR-FORD-COUGAR-FOCUS-2-0-MK1-MONDEO-MK2-2-0-1996-to-20005/163490440769?hash=item2610ca2641:g:4H4AAOSwUP5cP0 ~D

View User's Profile View All Posts By User U2U Member
big_wasa

posted on 11/6/19 at 05:54 PM Reply With Quote
Like I say there are plenty of zetecs on throttle bodies running a standard 1.8 flywheel and Oem clutch. You know have a 2.0 flywheel. Get a matching clutch and you only have to play with the slave cylinder / clutch fork pivot a little.
View User's Profile View All Posts By User U2U Member
Pigsy

posted on 11/6/19 at 06:08 PM Reply With Quote
Thanks. Removing the box on the MG is a real trial and best avoided.
View User's Profile View All Posts By User U2U Member
Pigsy

posted on 11/6/19 at 09:46 PM Reply With Quote
Just ordered CLUTCH KIT FOR FORD COUGAR FOCUS 2.0 MK1 MONDEO MK2 2.0 1996 to 2005. £37.95.
The previous one suddenly found they had no stock!!!! Ho hum!

View User's Profile View All Posts By User U2U Member
Pigsy

posted on 11/7/19 at 03:42 PM Reply With Quote
Hi Wasa . Im so pleased to say that after a two week break, I have fitted the Cougar/Mondeo flywheel and clutch complete. It works very well. Its highlighted a leaking master cylinder but that is a quick replacement. Thanks very much for your help!!!!
View User's Profile View All Posts By User U2U Member
big_wasa

posted on 11/7/19 at 05:22 PM Reply With Quote
Glad your sorted.
View User's Profile View All Posts By User U2U Member
<<  1    2    3  >>
New Topic New Reply


go to top






Website design and SEO by Studio Montage

All content © 2001-16 LocostBuilders. Reproduction prohibited
Opinions expressed in public posts are those of the author and do not necessarily represent
the views of other users or any member of the LocostBuilders team.
Running XMB 1.8 Partagium [© 2002 XMB Group] on Apache under CentOS Linux
Founded, built and operated by ChrisW.