escary
|
| posted on 19/5/15 at 03:04 PM |
|
|
any advice, build gone!
after what seems an eternity I'm ready to get on with my build.
Trusted it to friend, too long ago and then lost myself in work
long story short my entire build is gone all I'm left with is desire.
Had considered the independent suspension route anyway so here goes
Would an MX5 build be a more straightforward build?
Are McSorley's drawings suitable for a MX5? I seem to recall he used a mazda rx7
any help, or thoughts appreciated
thanks
Ewan
|
|
|
|
|
Angel Acevedo
|
| posted on 19/5/15 at 06:25 PM |
|
|
By the looks of it you might be better off with a kit??
HTH.
Beware of what you wish.. for it may come true....
|
|
|
joneh
|
| posted on 19/5/15 at 06:28 PM |
|
|
I don't think there are complete MX5 plans. Saturn did some but the diff mount was dubious. Talon (if he's still fabricating) makes a
cracking MX5 diff housing that fits in the standard Haynes Chassis. I'd see if he's still making bits and get in touch.
|
|
|
dubzter
|
| posted on 20/5/15 at 12:02 PM |
|
|
I got one of Talon's chassis and diff cover just recently, haven't started the build yet but it looks like it is a well fabricated kit
_______________________
Blog
Facebook Build Thread
Haynes Forum Build Thread
Locost Builders Build Thread
|
|
|
