Would you pay £460 for this?
I've been given a second chance offer and resigned myself to not getting the TBs so now I'm not sure! Seems to be a bargain though
http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=280327524993&ssPageName=ADME:X:SCO:GB:1123
Set of tbs should cost you £100, manifold £80 and a new MS ecu about £300, so seems steep for some second hand kit.
You could make it for less if so inclined, but its not a bad deal based upon the amount of effort required to produce that.
True value I would say is nearer £300, its not like they are expensive Jenvy TB's or an emerald ECU.
Regards Mark
[Edited on 27/3/09 by mark chandler]
Hmmmm no,
I bet they look better in that pic than in the flesh. They dont look that well put together imho.
my costs for the same setup
£110 for a guy i know to make me a manifold (not flowed or anything)
£100 for my R1 TBs (that I could sell)
£35 for *plastic* trumpets and connecting rubbers (that I could also sell)
£310 for MS1, £350 for MS11
£25 for the fuel reg?
Thats quickly approaching £600
[Edited on 27/3/09 by cd.thomson]
Thats a standard manifold thats been cut up and hence "flowed"
Buy your Ms direct from the states and its £130 plus pnp and duty.
So you can half that £600
Keep an eye on the bay and you will get a good set of Tb's for £50 or less if your patiant.
[Edited on 27/3/09 by big_wasa]
hmm okay, well ive got the TBs already so that expense is fixed at £100! I think the consenus is for me not to buy them...so the money will be spent elsewhere on the car for the time being. Cheers guys.
TBH I don't like the look of that ad, 0 feedback new user, with a £460 item, no postage collect only listing.
The do look a bit ropey as wazza says too.
[Edited on 27/3/09 by r1_pete]
hmm okay, well ive got the TBs already so that expense is fixed at £100! I think the consenus is for me not to buy them...so the money will be spent elsewhere on the car for the time being. Cheers guys.
This is a better pic of how its been done.
to hijack my own thread, because the advice is so sensible on financial things.
Would you pay £110 inc delivery for this manifold:
manifold
Description
I add this because it looks ginormous compared to that one youve just shown!
[Edited on 27/3/09 by cd.thomson]
Very nice welding.
Short track will do you a plate for £20.
Say £10 for tube.
That leaves fabrication.
In my opinion that manifolds not finished. Does it have the correct port spacings for your Tb's ?
No point In respacing them to fit.
If they fit ? its not a bad price.
sorry should have mentioned that this isnt my actual manifold. Mine will be spaced to suit based on a template I'm sending him.
Thanks for the comments big_wasa, theyve been really useful.
and who on this planet would call themself sexdeadpeople?
quote:
Originally posted by daniel mason
and who on this planet would call themself sexdeadpeople?
