bart
|
posted on 17/3/15 at 10:18 PM |
|
|
copper tube
looking at the dimension's shirley ( stop calling me shirley ) 15 mm copper tube would do the trick with 90 deg elbows at each end.
you can bend "new soft" copper tube over your knee the amount you need in the picks.
you might mess a few up but its not that expensive.
if you want to get really tech cap off , fill with sand ram down till hard cap the other end off then bend away no crimping
use a piece of drain as a mandrel. you could always run a blow torch over before to anneal the tube.
with sand bet you could do larger as well.
BE ALERT > BRITAIN NEEDS LERTS
|
|
|
coozer
|
posted on 17/3/15 at 10:30 PM |
|
|
Get a plumbers spring! Thats what you use to bend over your knee.
What you making like??
1972 V8 Jago
1980 Z750
|
|
bart
|
posted on 17/3/15 at 10:44 PM |
|
|
got posted wrong
got posted wrong , must have hit new topic without realising
was in response to some Arial question some one posted .
he was trying to make a long spiral
BE ALERT > BRITAIN NEEDS LERTS
|
|
bart
|
posted on 17/3/15 at 10:50 PM |
|
|
next random post
my next random post will be !
12" insert forcefully using lubricant, twist if necessary , use tie wraps if that helps .
" but that was the wrong forum all together"
BE ALERT > BRITAIN NEEDS LERTS
|
|
Angel Acevedo
|
posted on 17/3/15 at 11:16 PM |
|
|
quote: Originally posted by bart
got posted wrong , must have hit new topic without realising
was in response to some Arial question some one posted .
he was trying to make a long spiral
Not just "someone "...
It was THE boss...
Better put your stuff right...
Hhhh...
Beware of what you wish.. for it may come true....
|
|
HowardB
|
posted on 18/3/15 at 07:29 AM |
|
|
I like the idea of wholly random posts,....
how about?
I would have seen it but it was foggy and I was asleep.....
Howard
Fisher Fury was 2000 Zetec - now a 1600 (it Lives again and goes zoom)
|
|
gremlin1234
|
posted on 18/3/15 at 12:49 PM |
|
|
quote: Originally posted by HowardB
I like the idea of wholly random posts,....
how about?
I would have seen it but it was foggy and I was asleep.....
that'll be the eclipse on Friday!
|
|
scudderfish
|
posted on 18/3/15 at 07:27 PM |
|
|
I finally managed to explain myself and had a good laugh about it with the judge.
|
|
HowardB
|
posted on 18/3/15 at 07:47 PM |
|
|
quote: Originally posted by gremlin1234
quote: Originally posted by HowardB
I like the idea of wholly random posts,....
how about?
I would have seen it but it was foggy and I was asleep.....
that'll be the eclipse on Friday!
Sadly it was the aurora....
Howard
Fisher Fury was 2000 Zetec - now a 1600 (it Lives again and goes zoom)
|
|