theconrodkid
|
| posted on 9/8/14 at 11:39 AM |
|
|
free cad drawing prog
after a cad prog to measure something,i used to have one like etcha sketch but cant find it now,nothing complicated please
who cares who wins
pass the pork pies
|
|
|
|
|
BenB
|
| posted on 9/8/14 at 11:49 AM |
|
|
I've used stdcad with good results. Some of the others seemed to complicated for me (cad noob).
|
|
|
Sam_68
|
| posted on 9/8/14 at 12:53 PM |
|
|
For 2D drafting, there's Draftsight by Dassault Systemes, which is
functionally similar to AutoCAD (but very stripped-to-basics) and produces .dwg and .dxf files that can be read by the majority of software.
For 3D stuff, there's the ubiquitous Sketchup, which is very fun and easy to use, and surprisingly flexible
for 3D work, but a dead loss for producing 'proper', 2D orthographic projection engineering drawings.
|
|
|
theconrodkid
|
| posted on 9/8/14 at 01:45 PM |
|
|
cheers guys ill have a look,sketchup was the one i had before
who cares who wins
pass the pork pies
|
|
|
Alan B
|
| posted on 9/8/14 at 04:54 PM |
|
|
Agree with Draftsight, also NanoCAD looks good too....both good AutoCAD clones.
For the cost of these (zero) it really is worth taking a little time to learn them rather than looking for something even easier (and much less
capable.
Alan
|
|
|
theconrodkid
|
| posted on 9/8/14 at 06:38 PM |
|
|
tried to download them all,my compo is too old and slow for them apart from cadstd,just trying to get that working 
who cares who wins
pass the pork pies
|
|
|
