BigDawgV8
|
| posted on 4/3/15 at 06:57 PM |
|
|
Carbon Fibre Sheet Supplier Wanted
Hi All,
One of my other hobbies is RC car racing.
I'm currently building a hybrid 1/8 truck and need to make a new carbon fibre chassis.
The carbon fibre needs to be 3 or 4 mm thick and roughly 20cm x 40cm. All the stuff I have found on the Bay is too small.
Is there anywhere that sells off-cuts or can supply carbon fibre sheet of this size?
The other issue is that ideally it needs to have a slight 'kick up' at one end.
Thanks for any help or advice.
Martin
|
|
|
|
|
hkp57
|
| posted on 4/3/15 at 08:26 PM |
|
|
This place has flat sheet or all materials to make your own.
http://www.easycomposites.co.uk/Products/Prepreg-Carbon-Fibre-Sheet.aspx
Fleet
SKC Raptor R - Hayabusa
Toyota C-HR Hybrid Limited Edition
Honda VFR1200 CrossTourer
DCT
Marlin Roadster 1800
Mercedes Vito 116 Sport
|
|
|
CNHSS1
|
| posted on 4/3/15 at 09:22 PM |
|
|
Hansell Composites (fibrelyte) in north east
Martin Hansell has been involved wiyh the rc scene for 20years
"Racing is life, everything else, before or after, is just waiting"---Steve McQueen
|
|
|
madrallysport
|
| posted on 4/3/15 at 09:38 PM |
|
|
I bought of this guy, super fella and will deal outside ebay. Carbon Linky
UNDERSTEER is when you hit the wall with the front of the car.
OVERSTEER is when you hit the wall with the rear of the car.
HORSEPOWER is how fast you hit the wall.
TORQUE is how far you take the wall with you.
|
|
|
Oddified
|
| posted on 4/3/15 at 10:38 PM |
|
|
I buy my carbon sheets for rc cars (brake disc's, radio trays etc etc) from this German manufacturer on ebay;-
http://stores.ebay.co.uk/ccomposites/
Very good quality, reasonable price and they'll deliver to the uk
Ian
|
|
|
