So here is the first
Mmm Turbo?
Rescued attachment CIMG1673.jpg
Not sure what you mean by sensible but heres mine anyway 
Note to self - need more up to date piccys
With apologies to clairetoo for stealing her pic.
My new engine !
[Edited on 28/11/09 by zilspeed]
.....
Rescued attachment Volvo 6.jpg
This one.JPG)
quote:
Originally posted by coozer
B6304/B6254
Forum Code:
Description
This thread is just pure automotive porn, its like seeing nice cars undressed
twin plenum 4l tom walkinshaw rv8
Rescued attachment PICT0001.JPG
Supercharged Coventry Climax
[Edited on 28/11/09 by iank]
Can't get more sensible than than this
Pinto closer
Rob
mine.jpg)
quote:
Originally posted by zilspeed
With apologies to clairetoo for stealing her pic.
My new engine !
Guess who secured a couple of these babies today for use in a mid engined car
Keep it Ford V6, not the forign rubbish, :-) :-) Cheers Ray
Engine
Toyota Beam 3sge! From a Toyota Altezza
just to prove it acutally worked aswell!!
You seem to have left the rest of the car at home!
http://picasaweb.google.com/lh/photo/_L2u-AV47y4HvrtF88lc7g?authkey=Gv1sRgCLfsoZrNyoKG4QE&feat=directlink
Not expensive, but does take a lot of room in the engine compartment and gets hot on the turbo side. 173 BHP in standard car form, more like 200 when
you put it in a locost (2.5" exhaust and cold air intake). Many cheap mods available (eg. bigger throttle body from a KA24DE, MAF from an SR20 or
K series Nissan etc)
BTW, mine cost me your equivalent of 650 pounds with engine transmission, loom, and computer, JDM low kms. Oh, and a brand new clutch was already
installed.
[Edited on 29/11/09 by RK]
I started here... 4AGE16V
Striker original 16V
After SVA I went here 4AGE 20V
Original engine bay layout - front
Then another 4AGE 20V + "leaf blower"
Rotrex installed
I may end up here next year but sadly not in the Striker.
LS3 6.2 V8
quote:
Originally posted by alistairolsen
1600 zetec se
quote:
Originally posted by Dan.
quote:
Originally posted by alistairolsen
B5234 correct choice of engine sir
my little dodge engine.
quote:
Originally posted by beaver34
1600 zetec se
quote:
Originally posted by iank
quote:
Originally posted by beaver34
1600 zetec se
Neat install, but get a new filter before yours starts ingesting the foam from the 'well used' one you have on there.
quote:
Originally posted by bj928
my little dodge engine.
Here's the carburreted 3SGE Gen3 in my Spyder.
Geoff.
