Printable Version | Subscribe | Add to Favourites
New Topic New Poll New Reply
Author: Subject: Type 9 prop measurement required
snippy

posted on 27/3/20 at 02:21 PM Reply With Quote
Type 9 prop measurement required

Trying to find the length of the slide yoke part on a propshaft that slips into the rear of a Type 9 box. Has anyone got a prop lying about they can measure please? The yoke is the UJ type, not rubber joint. Just need the length of the tubular section that fits onto gearbox output shaft. Thanks
View User's Profile E-Mail User View All Posts By User U2U Member
Myke 2463

posted on 27/3/20 at 02:51 PM Reply With Quote
My spare is 102mm.





Be Lucky Mike.

View User's Profile View All Posts By User U2U Member
snippy

posted on 27/3/20 at 09:58 PM Reply With Quote
That's great thanks. I have 50mm visible out the back of the box so I've got another 50mm on the shaft then. Thanks for that.
View User's Profile E-Mail User View All Posts By User U2U Member
Kerrsco22

posted on 29/3/20 at 07:14 PM Reply With Quote
I have a prop off my supercat which fits type 9 onto Sierra diff
View User's Profile View All Posts By User U2U Member

New Topic New Poll New Reply


go to top






Website design and SEO by Studio Montage

All content © 2001-16 LocostBuilders. Reproduction prohibited
Opinions expressed in public posts are those of the author and do not necessarily represent
the views of other users or any member of the LocostBuilders team.
Running XMB 1.8 Partagium [© 2002 XMB Group] on Apache under CentOS Linux
Founded, built and operated by ChrisW.