Printable Version | Subscribe | Add to Favourites
New Topic New Poll New Reply
Author: Subject: exhaust - do I need the flexi?
craigdiver

posted on 7/8/18 at 03:30 PM Reply With Quote
exhaust - do I need the flexi?

As per the title, do I need the flexi or are the exhaust mounting rubbers sufficient?







If it ain't broken, fix it anyway (just because).

Building - BMW powered Haynes Roadster/442E hybrid.

Volvo C30 T5 Polestar

View User's Profile View All Posts By User U2U Member
nick205

posted on 7/8/18 at 03:37 PM Reply With Quote
No flexi on my MK Indy, just a rubber mount at the rear of the silencer. Never had any issues with it.


View User's Profile View All Posts By User U2U Member
craigdiver

posted on 7/8/18 at 03:42 PM Reply With Quote
quote:
Originally posted by nick205
No flexi on my MK Indy, just a rubber mount at the rear of the silencer. Never had any issues with it.


Thanks Nick, was going to support near the cat then at the rear of the silencer but you have got me thinking now if two mounts
are needed, hmmmm





If it ain't broken, fix it anyway (just because).

Building - BMW powered Haynes Roadster/442E hybrid.

Volvo C30 T5 Polestar

View User's Profile View All Posts By User U2U Member
rusty nuts

posted on 7/8/18 at 03:52 PM Reply With Quote
Mine has just a single mount at the rear , have had no problems in at least 12 years . Make sure the engine mounts don't have too much flex , fit an engine steady if needed.
View User's Profile View All Posts By User U2U Member
myke pocock

posted on 7/8/18 at 03:59 PM Reply With Quote
Well that IS a surprise. I would have thought flexi all day but just goes to show what I know!!! (or dont)
View User's Profile E-Mail User View All Posts By User U2U Member
nick205

posted on 7/8/18 at 04:09 PM Reply With Quote
quote:
Originally posted by craigdiver
quote:
Originally posted by nick205
No flexi on my MK Indy, just a rubber mount at the rear of the silencer. Never had any issues with it.


Thanks Nick, was going to support near the cat then at the rear of the silencer but you have got me thinking now if two mounts
are needed, hmmmm



I must admit that my exhaust didn't have (or need) a cat in it.

View User's Profile View All Posts By User U2U Member
snapper

posted on 7/8/18 at 05:57 PM Reply With Quote
It’s all about engine movement so you need firm engine mounts as stated and possibly an engine steady but I’ve not needed one.
Counter intuitively a single slightly flexible exhaust mount near the back of the silencer is better than 2 mounts as the forward mount becomes the point at which the manifold and down-pipe will pivot, then you would need a flexi





I eat to survive
I drink to forget
I breath to pi55 my ex wife off (and now my ex partner)

View User's Profile View All Posts By User U2U Member
Nickp

posted on 8/8/18 at 05:37 AM Reply With Quote
No flexi on mine either, just a single rubber mount under the silencer. I have Land Rover engine mounts and a steady.
My silencer looks a fair bit bigger than yours (27" IIRC) and was still just under the noise limit at IVA.
Also, what's your plans for that CAT? As there's a lot of sharp edges on it.

[Edited on 8/8/18 by Nickp]

View User's Profile View All Posts By User U2U Member
craigdiver

posted on 8/8/18 at 11:43 AM Reply With Quote
quote:
Originally posted by Nickp
No flexi on mine either, just a single rubber mount under the silencer. I have Land Rover engine mounts and a steady.
My silencer looks a fair bit bigger than yours (27" IIRC) and was still just under the noise limit at IVA.
Also, what's your plans for that CAT? As there's a lot of sharp edges on it.

[Edited on 8/8/18 by Nickp]


Silencer was cheap, was hoping I would have room for a second that could be put in line to reduce db if needed. The cat will be wrapped in exhaust wrap to keep it nice and hot (and cover the sharp edges). (going to round off some of the sharp edges too)

[Edited on 8/8/18 by craigdiver]





If it ain't broken, fix it anyway (just because).

Building - BMW powered Haynes Roadster/442E hybrid.

Volvo C30 T5 Polestar

View User's Profile View All Posts By User U2U Member
loggyboy

posted on 8/8/18 at 01:08 PM Reply With Quote
Depend son how firm the engine is and if the exhaust isnt solidly mounted to the chassis.

If you have a very firm engine it shouldnt be needed, if there is engine movement you want to match that with exhaust, either with the flexi or have a reasonable movement in which ever rubbers you mount the exhaust it on.





Mistral Motorsport

View User's Profile View All Posts By User U2U Member

New Topic New Poll New Reply


go to top






Website design and SEO by Studio Montage

All content © 2001-16 LocostBuilders. Reproduction prohibited
Opinions expressed in public posts are those of the author and do not necessarily represent
the views of other users or any member of the LocostBuilders team.
Running XMB 1.8 Partagium [© 2002 XMB Group] on Apache under CentOS Linux
Founded, built and operated by ChrisW.