Found a few things in the garage I don't need any more, anyone interested??
Burton crossflow rocker cover. Has been modded at some point for 3 breather elbows - 2 at the rear top and 1 directly above the block breather. Can be
filled up or I still have the elbows it you wish to re-attach them. Comes with cap head bolts.
£25 inc postage.
Image deleted by owner
Image deleted by owner
Crossflow oil pump. Will ony fit RWD blocks. Has been used to about 5-600 miles until I changed to a high capacity pump when I fitted a remote filter
and cooler.
£14 inc postage
Image deleted by owner
32mm beaded hose joiner - nowt to say really!
£4 inc postage
Image deleted by owner
Fiesta thermostat housing - with threaded hole for fan switch, 8mm take off and 32mm top hose take off.
£4 inc postage
Image deleted by owner
Atlas axle wheel bearings - brand new complete axle set. Firstline part number FBK 023.
£15 inc postage
Image deleted by owner
Escort thermostat Housing SOLD!
Image deleted by owner
Expansion tank. I think of Austin origin iirc. Come with non pressure rad cap. Has 1 overflow take off and 1 inlet which goes almost to bottom of
tank.
£8 inc postage
Image deleted by owner
Also have a 1600 mexico head. I assume it has standard valves although I haven't had chance to measure. looks like inlet ports have been opened
out. £15 but you need to arrange pickup/collection for this.
Image deleted by owner
Image deleted by owner
Image deleted by owner
[Edited on 25/10/09 by prawnabie]
[Edited on 25/10/09 by prawnabie]
Where abouts are you? I could be tempted with a few bits (head / overflow / thermostats)
Bromsgrove
U2U sent with reference to:
Escort thermostat Housing £10 inc postage.
Escort stat housing sold!
Are you selling the oil cooler and sandwich plate?
They are already sold sorry!
Hello, can you send the head and the cover to Spain or have you got any best idea?
I'd be interested in the rocker cover if it's not yet sold?
Could I have the fiesta housing and expansion tank?
If you're coming to the monthly pub meet in south brum i can collect from there.
Mike If you sill want them you can have them FOC at the next meet.
yes please
I'll buy you a pint so its not completely free of charge.
If you want rid of anything else, i'll happily store them in the g/f garage (aka, old skool ford parts store)
u2u re bearings
only the Oil pump and hose joiner left now!