Board logo

Zetec Blacktop, Type 9, GTS Wishbones, Brackets for sale!
MattCraneCustoms - 21/3/10 at 08:47 PM

Hi Guys,

Not been on for a while, I'd started stockpiling bits for a Locost project, but it never happened!

Want to get rid as parts are just taking up space. I've got:

Zetec engine w/shortened sump, 1.8 flywheel, both standard manifolds, loom and new coil pack. On ebay but would take offers, item no. 170462544615. Has bids now so if you want it please bid for it on ebay!

GTS Wishbones Book upper and lower, Powder coated by GTS never used: £120 these are £185 on RalDes!

Complete set of standard 'book' brackets: £10 + P&P

Ford Type 9 Box, mechanical pickup, with gearlever, has been repainted £40

Type 9 Standard Iron Bellhousing £30

Please email / PM me for more info, photos are in this album:

http://picasaweb.google.com/MattCraneCustoms/ForSale#



Thanks and Regards,

Matt
[img]http://picasaweb.google.com/MattCraneCustoms/ForSale#5450417233271287986[/img]


[img]http://picasaweb.google.com/MattCraneCustoms/ForSale#5450417240224893682[/img]

[Edited on 22/3/10 by MattCraneCustoms] Rescued attachment 02-01-07_1525.jpg
Rescued attachment 02-01-07_1525.jpg


MattCraneCustoms - 21/3/10 at 09:20 PM

Also I've got a Clarke 4 wheel engine stand, which I bought for when I was going to work on the above Zetec engine... so it's like new! Just taking up space, £60 in Machinemart

£40, collection only!

[Edited on 22/3/10 by MattCraneCustoms]


coozer - 21/3/10 at 09:26 PM

AARRGGHHHHH.. would take the box off ya, but as usual too far away.

Anyone courier it to the north east??


MattCraneCustoms - 21/3/10 at 09:48 PM

I could weigh it and get it sent on a pallet via TNT at work, but postage would probably be more than the box!

I can check if you want though?


Flick - 21/3/10 at 11:04 PM

u2u


TimEllershaw - 22/3/10 at 10:04 AM

Yes please for the gearbox if it is still available.

Thanks,

Tim.


MattCraneCustoms - 22/3/10 at 04:04 PM

For the Type 9 It would be around £30 on an economy delivery to the north east.

Regards,

Matt.

P.S. If you have any questions I'll probably answer quicker if you email me at:
mattcranecustoms@gmail.com.
Had loads of U2U's when I just looked!


MattCraneCustoms - 25/3/10 at 11:19 AM

Brackets now sold, engine is on ebay LINK

GTS bones, gearbox and other bits still available!


MattCraneCustoms - 30/3/10 at 05:47 PM

Engine now sold, still for sale:

GTS Wishbones front Uppers and Lowers

Type 9 Bellhousing

Type 9 gearbox, I've also got a gasket set I'll throw in with this! - Provisionally Sold!

Thanks,

Matt

[Edited on 30/3/10 by MattCraneCustoms]


maph2 - 30/3/10 at 07:24 PM

have pm'ed you about the gearbox. i'll take it if still for sale.

Matt


MattCraneCustoms - 2/4/10 at 05:59 PM

Gearbox is sold! Remaining:

GTS Wishbones as per book - £120 + P&P
Type 9 Bellhousing - £30 Collect


Thanks!

Matt