The end of the build is close so I'm clearing out and selling the things that are now surplus. These items have either been made surplus due to a change in plans or came as part of job lots.

Everything is collection only as I do not have time to mess about posting it. Most of it is too big/heavy to post anyway. I live just outside Nuneaton (CV13) near but I'm often around Northhampton, Derby and Gloucestershire, possibly even Rotherham.

If somebody wants a job lot I'd do a hefty discount just for the convenience.

Nicer bits:

BEC Paddleshift (I think its a Stuart Taylor item but maybe not). Never used, some marks from trial fit and being in the garage.


Offers on this one.

Hi-Spec Calipers, Ultralite 4 for 245mm disc (I believe) Cortina upright fitment. Very small amount of use and come with a set of Mintex half worn race pads.


£100

Brand New MK Indy Pedals.


Offers on these.

Set of front rod ends/bearings, all brand new but with some garage dirt on them. For Cortina/Sierra build:


£30 / Offers

I'd like to sell the following as a job lot but may sell seperately:

Its basically a kit to convert a drum braked/Sierra diff locost westfield to Disc Brakes and a freelander diff (just need the diff)

Recon Sierra Cosworth Rear Bearing carriers and hubs for disc brakes. New bearings, seals etc etc.
2x Hubs, well used
2x Bolt on Sierra driveshafts well used (CV's are knackered)
2x Freelander Driveshafts (cut in half to sleeve and weld onto the Sierra shafts)
Westfield Freelander diff mounting frame
Westfeild Type 9 to Freelander Diff Propshaft










The hubs/carriers were £95 alone, I'll take £100 for the lot

Other Bits:

MK Indy Plastic Fuel Tank. 20l, Used, has level sender included.


£30

Sierra Adjustable Steering Column, really good condition and comes with a brand new Ford Lock barrel and key.


Offers on this

4x Old School (cool as fook) Ford Wheels. 5.5" x 13" come with matching (budget) tyres, wheel nuts and centre caps. Would be great IVA or period wheels.


£150 / Offers

Fibreglass Seat, has an embedded Kevlar effect. Used


£20

16" Fan, from a Pug 406, nice and compact cowling and convenient mounting brackets.


£5 or I'll throw it in with any other purchase.

Cheapo stick welder, good for dragging outside to weld thing roughly


£10 or again I'll throw it in with another purchase.

[Edited on 11/6/12 by Doctor Derek Doctors]

You have a u2u.

Chris

U2U!
R.E the tank

Michael



[Edited on 12/6/12 by michael92]

PSpirine might be interested in the pedals....?

Will u split the rear carriers? if so how much?

Dibs on the seat

U2U sent

Tilly

Would have taken welder if you were closer, unless you can post?

quote:

---

Originally posted by loggyboy
Will u split the rear carriers? if so how much?

---

quote:

---

Originally posted by Doctor Derek Doctors

quote:

---

Originally posted by loggyboy
Will u split the rear carriers? if so how much?

---

Which bits do you want seperately?
I assume you just want the recon'd carriers and hubs?

---

Hmmmmm loads of people are asking if I'm going to the Newark show which I can't do..... but if someone was on the ball they could come round and buy a job lot, take it to Newark and make a quick buck............. just a suggestion

You have a U2U

Seat and Fuel Tank have gone now. Calipers and Welder are in negotiation. The rest is still availiable.

Calipers are now sold.

The rest is still for sale