A few bits for sale
ChrisLeary - 19/5/13 at 07:08 PM
Evening all,
I have for sale;
A zetec (silvertop) Alloy Inlet Manifold, for 38mm throttle bodies. They were made by the previous owner of the car, and had fitted GSXR tb's on
a 2.0l zetec.
£40??? +p+p
A mild steel exhaust flange for a zetec. Brand new from kit spares, cost me £15 +p+p.
£10 +p+p
A set of three Aero Catches. I wasn't given the keys for these when I collected the car, but I'm sure the locks can be changed if
required.
£10 +p+p
A water temperature adapter for 38mm hose, with temp adapter thread of M14x1.5. It has the temp sensor with it, part no FAE36050. On at 87, off at
82.
£5 +p+p
A standard sierra steering rack, has had a new lick of paint, but could do with some new bellows. No play in it though.
£10 +p+p
Cheers for looking,
Chris
[Edited on 20/5/13 by ChrisLeary]
ETA; The exhaust flange is mild steel, not stainless. Sorry for the confusion.
[Edited on 20/5/13 by ChrisLeary]
loggyboy - 19/5/13 at 07:19 PM
Is the flange defo stainless, if so il have it.
BigFaceDave - 19/5/13 at 07:21 PM
Yes please to the water temperature adaptor please! U2U on its way!
ChrisLeary - 19/5/13 at 07:24 PM
quote:
Originally posted by loggyboy
Is the flange defo stainless, if so il have it.
Yes, that's what they told me when I bought it.
Regards,
Chris
ChrisLeary - 19/5/13 at 07:28 PM
quote:
Originally posted by BigFaceDave
Yes please to the water temperature adaptor please! U2U on its way!
Replied...
Cheers,
Chris
loggyboy - 19/5/13 at 08:34 PM
quote:
Originally posted by ChrisLeary
quote:
Originally posted by loggyboy
Is the flange defo stainless, if so il have it.
Yes, that's what they told me when I bought it.
Regards,
Chris
I only ask as the website lists it as mild.
ChrisLeary - 19/5/13 at 08:41 PM
quote:
Originally posted by loggyboy
quote:
Originally posted by ChrisLeary
quote:
Originally posted by loggyboy
Is the flange defo stainless, if so il have it.
Yes, that's what they told me when I bought it.
Regards,
Chris
I only ask as the website lists it as mild.
Ah, it does, they definately told me it was stainless to go with the stainless manifold i bought.
Is there a quick test I can do to check?
Cheers,
Chris
loggyboy - 19/5/13 at 08:43 PM
Make a small part damp and leave it over night, if it rusts its not stainless, if it doesn't then consider it sold!
ChrisLeary - 19/5/13 at 08:57 PM
quote:
Originally posted by loggyboy
Make a small part damp and leave it over night, if it rusts its not stainless, if it doesn't then consider it sold!
Ok mate, I'll do it first thing tomorrow and let you know as soon as something does, or hopefully doesn't happen!
Cheers,
Chris
NigeEss - 19/5/13 at 09:40 PM
Ah, it does, they definately told me it was stainless to go with the stainless manifold i bought.
Is there a quick test I can do to check?
Cheers,
Chris
Get a magnet, if it sticks to the flange then it's mild, if the magnet doesn't stick it's stainless.
(Some lower grade stainless the magnet will very slightly stick.)
henryc - 19/5/13 at 09:58 PM
Yes please for the aero catches, u2u in its way....
FazerBob - 19/5/13 at 10:58 PM
quote:
Originally posted by henryc
Yes please for the aero catches, u2u in its way....
Henry, if you don't need all 3 can I relieve you of one, please?
ChrisLeary - 20/5/13 at 09:37 AM
Update:
Temperature adapter SOLD
Aero Catches SOLD
Everything else still available.
Cheers,
Chris
ChrisLeary - 20/5/13 at 02:02 PM
The exhaust flange is mild steel. 
sorry for the wrong information.
Regards,
Chris
ChrisLeary - 23/5/13 at 09:18 AM
Bump