I am working on a 1.8 Silvertop Zetec from Escort. I am missing the multi-groove water pump pulley, if anyone has one they would part with please let me know.

Also.

On the oil dipstick and tube, I have been unable to obtain one so is it possible for someone to measure up the tube and dipstick and I can try to fabricate one.

Is the 1.8 Blacktop one the same size would it fit and read correctly if anyone knows appreciated.

Adrian

[Edited on 17-8-11 by AdrianH]

I have a spare 1.8 silver top dipstick and tube in my garage and may possibly have a pulley as well.Will look tomorrow and let you know .
Paul

Would be brilliant if you have Paul.

Let me know

Adrian

I have found the dip stick and tube but think I must have binned the pulley .I measured the dipstick against my 2 litre black top one and the tube and dip stick are about 50mm shorter but mount lower down on the engine, so it looks as if the actual amount the dipstick protrudes into the sump is the same.If you have a black top dipstick then you could measure the protrusion from the end of the tube to compare as this is all that matters, if not I can arrange to get the one I have posted to you if you pay the postage.
Paul

Paul I will gladly take the dipstick and tube off you let me know what you would like for them and I can paypal or post cheque etc.

Adrian

I am looking for such pulley as well. Anyone?