Board logo

Picking up my Vortx RT+ kit tomorow
Eatpies99 - 25/9/11 at 11:34 AM

Picking up the kit tomorow Vortx RT+ (BEC hayabusa). REally looking forward to building it over winter Ill try post some pics up tomorow evening when ive collected it all.

Any reccomendations on tools needed?? We have the basics but any advice is appretiated....

Thanks

Benzo - 25/9/11 at 02:28 PM

quote:
Originally posted by Eatpies99
Any reccomendations on tools needed?? We have the basics but any advice is appretiated....


Congratulations.. im sure you will have an extensive toolkit once your done

ffrgtm - 25/9/11 at 03:54 PM

Congrats Just found out my rt+ is finally floating across the ocean to me.

I'm also using a busa engine, did you go with gen 1 or 2?

Are you rolling your own wiring harness or did you get mnr's?

What kind of fuel tank are you using? I'm dead set of using a cell with a bladder but the returnless system is making that expensive...

scootz - 25/9/11 at 04:05 PM

Eatpies99 - 25/9/11 at 04:22 PM

quote:
Originally posted by ffrgtm
Congrats Just found out my rt+ is finally floating across the ocean to me.

I'm also using a busa engine, did you go with gen 1 or 2?

Are you rolling your own wiring harness or did you get mnr's?

What kind of fuel tank are you using? I'm dead set of using a cell with a bladder but the returnless system is making that expensive...


Hi mate

Went with a gen 1 engine. Planning on rebuilding the engine at some point to 1400-1500cc anyway so seemed pointless wasting extra money on the gen 2.

Using MNR's wiring harness. Hopefully make life easier for me...

FUel tank i assume is bog standard supplied one.

Hope that helps.

big_l - 25/9/11 at 05:29 PM

Congrats mate you defo picked the best kit/ engine can't wait to see pics. Chris and Marc are awsome

spdpug98 - 25/9/11 at 05:37 PM

Congratulations, plenty of people on here to help out if you get stuck or need a bit of advice

Eatpies99 - 25/9/11 at 10:24 PM

Thanks lads

big_l - 18/10/11 at 10:07 PM

pics pics pics!!!!

Eatpies99 - 18/10/11 at 10:36 PM

I really do need to upload some pics of the kit and the progress of the build!!

Lee MacPherson - 19/10/11 at 08:36 PM

Excellent choice of kit, upload some pics, you have loads of support locally.