Board logo

Post a Picture!!!
Mezzz - 16/4/06 at 11:55 PM

Well a picture is worth a 1000 words.

So please post a picture of your car, or work in progress

Rules

-Dont chat to much please

-With your car have informaion on engine size, cost of build, time of build and what kit/plans you used



JUst though that I would get this threat back to the top


Post more pictures please

[Edited on 11/5/06 by Mezzz]


Simon - 17/4/06 at 12:21 AM

BYOSCfala£250 by RC

Chassis +4" homemade mostly.
Rover V8, IRS

WIP - collecting bits for FI and twin turbo run by MS

ATB

Simon Rescued attachment 2006_0327Image0013.JPG
Rescued attachment 2006_0327Image0013.JPG


Ketchup - 17/4/06 at 12:26 AM

locost chassis with luego velocity grp, 2.0 pinto on carbs, started in august last year, spent about 2200 so far with about another 500 to go i think!

and yes, the rear arches are just sitting on the wheels, i just wanted it to look like a car for once Rescued attachment in progress.JPG
Rescued attachment in progress.JPG


RoadkillUK - 17/4/06 at 12:28 AM

It just so happens that we polished the car today

Approx. 3 Years worth of Sundays, £2500, 1600 X-Flow and Ron's book.









omega0684 - 17/4/06 at 01:07 AM

here is mine so far






ch1ll1 - 17/4/06 at 06:50 AM

here's mine so far





it helps having a ramp to play with


[Edited on 17/4/06 by ch1ll1]


chris.russell - 17/4/06 at 07:57 AM

....struggling with the electric's....


SeaBass - 17/4/06 at 08:05 AM

McSorley Chassis + Panels from scratch.
Live Axle
1600 Xflow DD Weber Lolocost manifold + silencer
4 speed single rail
1300 diff
GAZ suspension
MK Glass + Seats
Dolomite Instruments
2CV Headlights

Most of my spare cash...
Loads of fun!


mandbsheldon - 17/4/06 at 08:22 AM

http://www.locostbuilders.co.uk/photos.php?action=showphoto&photo=100_0631.JPG


mandbsheldon - 17/4/06 at 08:54 AM

Try again.
www.locostbuilders.co.uk/uplaod/mini-100_632.JPG


Hellfire - 17/4/06 at 09:05 AM

MK Indy with 2004 ZX12R engine.



mandbsheldon - 17/4/06 at 09:12 AM

OK, so how do i show the picture?


JoelP - 17/4/06 at 09:57 AM

heres mine yesterday Rescued attachment golf 001.JPG
Rescued attachment golf 001.JPG


Jasper - 17/4/06 at 10:08 AM

First car

Home built standard chassis with ZX9 - crashed Jan 2005 and the parts sold to fund the next project. Rescued attachment beczx9.jpg
Rescued attachment beczx9.jpg


Jasper - 17/4/06 at 10:11 AM

Current build

Stylus with Nissan 200sx 2 litre turbo - Apexi ECU, Apexi boost controller, Apexi intake, cool plugs, SARD BOV, 3 inch exhaust, GTiR FMIC, should make around 280bhp and keep me warm and dry - unlike the last build... Rescued attachment DSCN1215.JPG
Rescued attachment DSCN1215.JPG


Mad Dave - 17/4/06 at 10:13 AM

This is mine

MK photo shoot 03
MK photo shoot 03


Winston Todge - 17/4/06 at 10:30 AM

Jasper...

Have you had a ride in a 200SX powered kit car yet? They are absolutely ballistic...

A friend just bought the yellow Stylus that was featured in Kit Car mag awhile back. It's only the 1.8 200SX motor but has A LOT of extras. It is absolutely insane on the road and slightly unuseable for normal day to day driving.

Are you thinking of a lot of track work?

Chris.


kev R1 - 17/4/06 at 10:31 AM

this is mine: indy R1 Rescued attachment easter 1.JPG
Rescued attachment easter 1.JPG


Vixus - 17/4/06 at 10:36 AM

quote:
Originally posted by Mad Dave
This is mine

MK photo shoot 03
MK photo shoot 03


How long did it take to build that smaller one?


tom_loughlin - 17/4/06 at 11:00 AM

Heres mine, its a GTS finished in Jan 2006, it took me about 18months to build (over uni holidays) and cost about £5-6k ish.
engine was sierra 1.8cvh which is now making way for a zetec.
the pic was taken in anglesey about a week or so ago
Tom





[Edited on 17/4/06 by tom_loughlin]


Jasper - 17/4/06 at 11:03 AM

quote:
Originally posted by Winston Todge
Jasper...

Have you had a ride in a 200SX powered kit car yet? They are absolutely ballistic...

A friend just bought the yellow Stylus that was featured in Kit Car mag awhile back. It's only the 1.8 200SX motor but has A LOT of extras. It is absolutely insane on the road and slightly unuseable for normal day to day driving.

Are you thinking of a lot of track work?

Chris.


That car - from what I read (and I might be wrong) - was fairly crudely set up. He just stuck a big turbo on it and whacked up the boost - and I believe it's had at least 3 engines....

With the Apexi AVCR boost controller I will not only be able to switch between 7psi and 15 at the touch of a button, but also turn down the boost for 1st and 2nd gear, making it a much more manageable car. With these engines it not about the total bhp, more about how they are set up and controlled. There are a couple of guys with the later engine in an MK with a similar set-up to what mine will be, and it's a very driveable car.

Mine will be for track, endurance rallies, and everyday driving. If I don't want it ballistic, I just hit the button for the low boost setting and pootle around

Hey chaps - learn how to post a picture

[Edited on 17/4/06 by Jasper]

[Edited on 17/4/06 by Jasper]


Liam - 17/4/06 at 11:18 AM

2.7 honda V6 mated to cossie 4x4 box. Turbos in the future. Not too long now.....

Liam Rescued attachment DSCF0062.JPG
Rescued attachment DSCF0062.JPG


Liam - 17/4/06 at 11:19 AM

Crap photo from other end... Rescued attachment DSCF0061.JPG
Rescued attachment DSCF0061.JPG


liam.mccaffrey - 17/4/06 at 11:24 AM

mcsorley +442
2lt Vx ecotec on t'bs megasquirt ecu
opel manta gearbox xr4x4 rear end
DD2 lite

sorry no pic yet, I promised mysely i would take my first pick when i had a rolling chassis painted

about a month till then me thinks


kev R1 - 17/4/06 at 11:36 AM

looks like you're havin fun leigh!!!
cracking pics!!!!

see you're in the sticker gang!!!!!


mandbsheldon - 17/4/06 at 11:40 AM


TPG - 17/4/06 at 12:14 PM

Finished sva'd 2003.Cvh.Type9.+4" Book Chassis.Bloody great fun.So much so i'm making another,This ones for sale. Rescued attachment Sale small.jpg
Rescued attachment Sale small.jpg


Marcus - 17/4/06 at 12:18 PM

Scratch built book chassis, 1700 crossflow, Peugeot wheels, most definitely NOT for sale!!

car in France
car in France


Marcus


dave1888 - 17/4/06 at 12:34 PM

My Bucket, will it ever get finished Rescued attachment nose2.jpg
Rescued attachment nose2.jpg


mandbsheldon - 17/4/06 at 01:17 PM

Description
Description


WOOHOO!!!!!!!
Thanks Chris!!!!!!


lenny - 17/4/06 at 03:57 PM

rrx first real drive track day llandow oct05 now o/t/r Rescued attachment yellow6.jpg
Rescued attachment yellow6.jpg


lenny - 17/4/06 at 04:03 PM

3 in a row Rescued attachment 3cars.jpg
Rescued attachment 3cars.jpg


lenny - 17/4/06 at 04:06 PM

that is mad !!!!well fun he had all day !!!!


kev R1 - 17/4/06 at 04:15 PM

my old indy blade that i bought built off leigh sheldon.

i thought i better put the picture on leigh!!! Rescued attachment indy blade.jpg
Rescued attachment indy blade.jpg


mandbsheldon - 17/4/06 at 04:42 PM


dr-fastlane - 17/4/06 at 05:01 PM

Chassis: own design +9 inch!! with modefyd Sierra rear suspension
Engine: standard Sierra 2.0i ohc
Build time: 5 years (but no work done in the winter because the car stands outside in the
garden)

Here some pics from today.


dr-fastlane - 17/4/06 at 05:02 PM

another one


dr-fastlane - 17/4/06 at 05:03 PM

and the last one


chrisg - 17/4/06 at 05:19 PM

Dr.

I don't know how to break this to you....

You've made a mistake.....

The steering wheel......

it's...

it's....

Cheers

Chris

[Edited on 17/4/06 by chrisg]


k33ts - 17/4/06 at 08:47 PM

1660 xflow 140bhp
type 9 irs avon


k33ts - 17/4/06 at 08:48 PM

how do you get more than 1 pic in a post?


Mark Allanson - 17/4/06 at 10:29 PM

RH Headlamp Rescued attachment headlamp.jpg
Rescued attachment headlamp.jpg


greggors84 - 18/4/06 at 02:55 AM

MK Indy, 2.1 Pinto (For now!), took too long to build, other stuff just got in the way.

Description
Description


wilkingj - 18/4/06 at 06:05 AM

Nearly finished...
18 months, and well over budget.
More new piccies in the archive.


Easter Bonnet
Easter Bonnet


scutter - 18/4/06 at 04:54 PM

Here's mine before i started driving it all winter on the salted roads


panels on for first time
panels on for first time


And here it is right now


Right now
Right now


Dan.

[Edited on 18/4/06 by scutter]


Lennart - 18/4/06 at 07:02 PM

In progress... for about 2 years now.
It's a Dax Rush 2.0i DOHC LWB
Just fitting the last parts. Rescued attachment foto8602.jpg
Rescued attachment foto8602.jpg


Pezza - 18/4/06 at 07:59 PM

Keets

Curly mohawks are clearly teh win o/



lol

Ben


andybod - 19/4/06 at 09:10 PM

lets see if this works Rescued attachment luego3 046.jpg
Rescued attachment luego3 046.jpg


indykid - 19/4/06 at 11:00 PM

mine looked like this last summer.

mk indy, 1.6 pinto, carb (75bhp new!), type 9, open 3.62 diff, 8" drums. 18months to build, £7000, every receipt. Rescued attachment dax cycle wings.jpg
Rescued attachment dax cycle wings.jpg


indykid - 19/4/06 at 11:01 PM

and on the way to the newark show with pat and rob Rescued attachment sill trim.jpg
Rescued attachment sill trim.jpg


Mezzz - 20/4/06 at 12:28 PM

ouch same about the car..... (it was a beauty

hope ur fixing it.


Come on u lot must have more pictures!


redeye - 20/4/06 at 11:16 PM

work in progress

2.0 (was 1.8) pinto
mk book chassis
capri rear diff
twin weber 40's

http://www.locostbuilders.co.uk/photos.php?action=showphoto&photo=head%20on.JPG

[Edited on 20/4/06 by redeye] Rescued attachment rear light 2.JPG
Rescued attachment rear light 2.JPG


ned - 21/4/06 at 12:27 AM

only a month or two to go:

car as of 19-04-06
car as of 19-04-06


G.Man - 21/4/06 at 07:57 AM




My Vortx RT+ in her new garage




Under da hood


Krismc - 21/4/06 at 03:15 PM

VORTX RT PLUS, 2.0 black top Zetec on GSZR TB's, type 9, 3.62 LSD,
XR4x4 rear drive shafts and Discs, Raceleada ally uprights and hubs,
Custom cobra seats, R16 4 pot callipers, carbon dash, carbon tunnel,
every receipt well over £10k already- but looking good!
and loads more to buy!







Day 9 14/04/06 Rolling chassis
Day 9 14/04/06 Rolling chassis


[Edited on 21/4/06 by Krismc]


billy - 23/4/06 at 09:15 PM

Heres mine........up Luego..........er Down Luego.


Gav - 23/4/06 at 09:51 PM

Work in progress based on the McSorley and GTS plans, started august 2005



indykid - 24/4/06 at 07:00 PM

progress!

i'll be done soon

tom Rescued attachment chassis on cav.jpg
Rescued attachment chassis on cav.jpg


INDY BIRD - 24/4/06 at 08:44 PM

Oulton park total kit car live Rescued attachment oulton park.jpg
Rescued attachment oulton park.jpg


INDY BIRD - 24/4/06 at 08:49 PM

My old Dax Rush 186BHP Pinto.

Loved this car why did i sell it ?????

To get a BEC mad nutter thing. Rescued attachment dax 01-12-04.jpg
Rescued attachment dax 01-12-04.jpg


Donners90 - 24/4/06 at 09:27 PM

RV8 from P5B coupe
- with RR efi heads
- Real Steel Hurricane cam
- 390cfm Holley carb
- Producing 148BHP at the wheels
ETB Guagues
7.5" LSD
235/40 R17 Rear
205/45 R17 Fronts
....and the piece de resistance..... Nova SRi Seats
SVA on May 5th Rescued attachment 100_0402a.jpg
Rescued attachment 100_0402a.jpg


Trev D - 24/4/06 at 09:28 PM

Description
Description


bob - 24/4/06 at 09:46 PM

Rescued attachment Picture 002.jpg
Rescued attachment Picture 002.jpg


DaveFJ - 25/4/06 at 01:22 PM

yeah alright trev d - you win........


Mezzz - 11/5/06 at 11:12 PM

Post more pictures


redeye - 15/5/06 at 11:25 AM

updated pics


rear lights
rear lights


[img][/img]


DaveFJ - 15/5/06 at 11:38 AM



as at 12/05/06 - 3 years into the build and it still looks like this!!!!


macspeedy - 15/5/06 at 02:05 PM

for sale but i'll be back Rescued attachment 78194-4.jpg
Rescued attachment 78194-4.jpg


dilley - 15/5/06 at 07:07 PM

New wheels (only for show, so dont panick all you 17" haters!!!!!) engine is now out and being played with by holeshot.
[img]Documents and SettingsAJD GROUP LTDMy DocumentsMy PicturesP5110008.JPG[/img]


dilley - 15/5/06 at 07:12 PM

Still cant post pictures.
[img]Documents and SettingsAJD GROUP LTDMy DocumentsMy PicturesP5110008.JPG[/img]


Pezza - 15/5/06 at 08:39 PM

Finaly got it in the garage today after a month under a tarp.
Dismantled the front suspension this evening and got the uprights painted plack rather than silver.
Just need to do the rears now and the driveshafts


rayward - 16/5/06 at 04:28 PM

current state

as at 16/05/06
as at 16/05/06



as at 16/5/06
as at 16/5/06



as at 16/05/06
as at 16/05/06



Ray


Guinness - 16/5/06 at 08:31 PM

Me on track at Teeside, on a very very wet Monday.
Teesside 3
Teesside 3


I'm the mobile chicane holding everyone else up! Behind me a Dax Quadra (4x4) Cosworth, a Caterham R500 and a R400.

Donor bought 3rd May 2004, ordered kit at Newark show 2004, collected kit week after Harrogate 2004, finished and SVA'd November 2005.

Now just getting the miles down and fixing the odd gremlins!

Mike


carlgeldard - 17/5/06 at 06:56 AM

Front_Side View
Front_Side View


carlgeldard - 17/5/06 at 06:59 AM

Rebuilt after sudden stop
Rear View
Rear View


[Edited on 17/5/06 by carlgeldard]

[Edited on 17/5/06 by carlgeldard]


carlgeldard - 17/5/06 at 07:11 AM

rubbed down
rubbed down


carlgeldard - 17/5/06 at 07:18 AM

Description
Description


Syd Bridge - 17/5/06 at 09:01 AM

You'll all laugh at me for saying this, but....

That white car of G.Man's is one of the nicest looking I've seen in some time.

The white could be very 'plain', but after seeing all the reds and blacks and yellows/oranges....well. that white is a pleasing and welcome change.

Well done G.Man, just for being different, and making it work.

Cheers,
Syd.


Marcus - 17/5/06 at 09:22 AM

Agree with Syd, White was my first choice, but I bought a black scuttle and wings ('cos they were cheap), and it grew on me.
Chris Masons white S2000 powered car looks good too.

Marcus


Werner Van Loock - 23/5/06 at 07:18 PM

My stylus as I bought it (without engine and wheels though) It's currently in dry storage as my house with garage is not finished yet (by end of june)

It will be very low budget build. Only problem is to be able to register it in Belgium it needs an injection engine.
For the rest, Ebay is my partner




donut - 27/5/06 at 11:45 AM

Sorry i'm late chaps...

SVA in a few weeks

[img][/img]


Mezzz - 27/5/06 at 02:09 PM

Thats nice!

Where did you get the sticks on the side from?


givemethebighammer - 28/5/06 at 07:44 AM

Tiger Cat 2.0L zetec, Honda blackbird carbs. Rescued attachment catsmall.JPG
Rescued attachment catsmall.JPG


jollygreengiant - 4/6/06 at 08:28 PM

Bought the kit from luego, but wouldn't go in my shed so it sat in my back garden.
Then we moved and into a garage it went. Then we had an extension built so the car moved outside again until the builders had finished, but after that the MIL'S crud filled the garage and still does. So presently I am using the time to strip my doner.

Further pics can be seen in my photos.

MIL's = Mother-In-Law's

[Edited on 4/6/06 by jollygreengiant]


BKLOCO - 4/6/06 at 08:33 PM

Oh OK then


Front Quarter
Front Quarter


[Edited on 4-6-06 by BKLOCO]


Viper - 4/6/06 at 08:51 PM

quote:
Originally posted by jollygreengiant
Bought the kit from luego, but wouldn't go in my shed so it sat in my back garden.
Then we moved and into a garage it went. Then we had an extension built so the car moved outside again until the builders had finished, but after that the MIL'S crud filled the garage and still does. So presently I am using the time to strip my doner.

Further pics can be seen in my photos.

MIL's = Mother-In-Law's

[Edited on 4/6/06 by jollygreengiant]



MILS crud????

surely you mean my dear mother in laws prized possesions.....


trogdor - 4/6/06 at 08:58 PM

not sure if i should post a pic of my project since its not a seven styled car but its deffo a locost project! soon to zetec'd (and turbo'd if i am stupid enough) saab 96.

[Edited on 4/6/06 by trogdor] Rescued attachment Photo-0030.jpg
Rescued attachment Photo-0030.jpg


DIY Si - 4/6/06 at 09:38 PM

Progress as of two days ago 1.8 cvh type 9 old granada rear suspension on a custom de-dion. Current spend is roughly £500.
The inner space next to the welded panel (the bit you can see the wire croppers through) is also now a welded panel. Hoping to have a rear bulk head welded in soon and all the other interior welded stuck in too. Probably going overboard with the steel, but hey ho. Rescued attachment Untitled-1.jpg
Rescued attachment Untitled-1.jpg


Viper - 4/6/06 at 09:57 PM

this is probably the last pic i took of my "Avon"


DIY Si - 4/6/06 at 10:15 PM

Why does the exhaust go round the engine like that? Seems like excess pipework and extra under bonnet heating.


MikeRJ - 4/6/06 at 11:29 PM

quote:
Originally posted by DIY Si
Why does the exhaust go round the engine like that? Seems like excess pipework and extra under bonnet heating.


Turbo install maybe?


jollygreengiant - 5/6/06 at 03:58 AM

That looks mighty fine there viper.

Go on keep it going.


donut - 6/6/06 at 12:51 PM

quote:

Where did you get the sticks on the side from?

Good old fleabay


eccsmk - 7/5/08 at 09:59 AM

i like this thread so i thought id give it a bump up