Hi All,

I am using a type 9 gearbox from a 2.9 capri and bolting t on to a 2.9i Sierra engine, i.e. replacing the 4WD MT75.

Can any one tell me it the cluch arm and bearing from the MT75 with fit on the type 9?

Thanks in advance


Dave

I don't think the MT75 stuff is interchangeable.

If I were you I would get a 2.8i XR4x4 clutch release arm, bearing and possibly the bellhousing too. These all fit the 2.9 engine and the 2.8 4x4 sierra used the type 9 gearbox in 4wd adapted form.