Board logo

Locost replaced bodywork ?
Deckman001 - 5/3/20 at 04:55 PM

Hi All,

I have recently replaced the f/glass body work on my locost due to it being a bit too scratched for a good looking IVA test, so I was wondering if the old bits were of any use for any locost racers as all but the front cycle wings have been pre fitted and have the fixing holes as well as had fittings holes in them.

Nose is yellow
Bonnet in Blue
Scuttle in Blue
Rear Arches in Blue
Front Cycle wings in Blue, I also have a rear tub in red that i don't need.

Am only looking for about £10 per item of a job lot cost of £50

Any thoughts, as I think these could be ideal spares or cheap replacements for wrecked ones on your cars.

Pics of them can be sent if requested.

Am located in South Croydon, Surrey

Jason


Eddie1978 - 5/3/20 at 09:02 PM

PM sent


Deckman001 - 6/3/20 at 08:25 PM

And replied to

Jason


Eddie1978 - 6/3/20 at 10:43 PM

Pm you back


Deckman001 - 7/4/20 at 12:23 PM

Bump, not needed by 'Eddie1978' anymore as hes selling up his kit, anyone else think they could be of use ?

Currently they are packaged up on a pallet ready to be sent. Can send pics of each panel if needed.

Jason