well i got the nose cone, bonnet and scuttle all lined up Today.

But where the nose cone joins up to the side panel it doesnt look right.

What am i supposed to do here?




any help on this would be great.

Thanks

Are the side panels and the nose from the same supplier?

loads of indys look like that!

looks familiar

http://www.mksportscar.co.uk/index.php?option=com_picture&Itemid=61

see the red fireblade car

if not cut the pannels shorter not to fully enclose steering and Arm thats what i did

cheers

Had a similar problem with my GTS panels.

I cut the corner off at 45deg.



It doesn't look too bad from the front now.

quote:

---

Originally posted by -matt
well i got the nose cone, bonnet and scuttle all lined up Today.

But where the nose cone joins up to the side panel it doesnt look right.

What am i supposed to do here?

---

I still have this job to lok forward to.
HERE is a thread from a while ago on the same topic.

This photo looks as if someone has done it the way I suggested above...


nose cone fitted

Here's my GTS, managed to pull em in.


[img]
Front lights [/img]

just pull them in and bung a rivet in it to hold them

Thanks, it wont currently pull in. But if i cut the bottom off, it should then be nice and flexy and pull in i think.

A lot of Indys Ive seen have that area completely open, which looks as bad IMO. Im suprised its not something theyve looked at designing out or covering somehow.

It lets cold air in for cooling

quote:

---

Originally posted by loggyboy
A lot of Indys Ive seen have that area completely open, which looks as bad IMO. Im suprised its not something theyve looked at designing out or covering somehow.

---