Hi guys

Can you run the wiring loom and fuel line the same side inside the tunnel? Was going to p-clip the fuel line and wiring loom seperatly like one under the other. Is this ok for iva or would they prefer the fuel and wiring to be on separate sides? Also can you run either fuel or wiring with the brake lines?

Just trying to get an idea which is correct and doesn't look a mess.

Cheers guys

Ian

[Edited on 27/12/16 by Wolf1e]

If it was me I'll run the fuel and brake lines one side and wiring the other side .

Doesn't matter so long as everything is securely fixed at 300 mm centres and the pipe/ wiring doesn't rub on the chassis.

Also if not already planned use copper pipe or similar along the tunnel for the fuel line.
Saves the ache of changing a perishing rubber hose.

[Edited on 27/12/16 by Toprivetguns]

Thanks guys for input.

Toprivetguns: I am already going to run cooper pipe as was thinking the same ;-)

big-vee-twin: thank you :-)

I've already routed the brake lines so I'll route the wiring loom and fuel line the other side with the wiring loom the top one of the 2.

Thanks
Ian

Use kunifer instead copper if you want long term peace of mind.

This is my tunnel setup. Passed IVA without any comments.


P_clip_bracket

Have fun.