I have an axle that's said to be from a Mk5 Cortina. I've had a search on here and on Google, but there's nothing definite coming
up.
The ratio is 3.45, and the tag has the following information...
3,45 2B09
P79B(or an 8)G(or a 6)-4004 NA
The case has the following...
71BG-4198-AC
G24526
Can anyone help out with an identification? Koln, Atlas, HD Atlas???
Thanks in advance.
[Edited on 27/12/11 by scootz]
Can you post a pic of the diff from the rear.
If it's the MK5 Cortina axle that I have (e.g. Koln) then it will have loops each side of the diff at the top for bushes.
See djtom's pic:
Cheers PJay... although I'm sure I've seen Atlas' as well with the loops.
[Edited on 27/12/11 by scootz]
I would say that is a Cortina atlas
Okay so looks to be a Koln. Unfortunately not the "preferred weapon of the aggressor" from a BHP point of view.
I'm currently thinking of a swap to Sierra diff etc. like djtom (hence the pic) since I'm looking to up the power on the Duratec.
What's your reason for you identying the axle (if you don't mind me asking)?
quote:
Originally posted by pjay
Okay so looks to be a Koln. Unfortunately not the "preferred weapon of the aggressor" from a BHP point of view.
I'm currently thinking of a swap to Sierra diff etc. like djtom (hence the pic) since I'm looking to up the power on the Duratec.
What's your reason for you identying the axle (if you don't mind me asking)?
quote:
Originally posted by pjay
What's your reason for you identying the axle (if you don't mind me asking)?
From what I understand the Koln is certainly considered weaker than the Atlas (Burton Power refer to it in this way). Hopefully others here can
comment on max. BHP etc.
In terms of LSD not sure what options exist for the Koln and Burton move straight on to the Atlas but this doesn't mean they don't exist.
Worth talking to a diff/axle expert outfit - can't remember ones that have been recommended but they've been referred to on here.
Be interested in the outcome though since going Sierra diff for me means de dion and a far amount of mods.
Apologies Scootz missed your mention of Atlas and hoops - not seen these myself but others should be able to comment.
[Edited on 27/12/11 by pjay]
Easiest way to identify between the Atlas and the Koln is the backplate bolt spacings, the Koln (as above) has an offset top bolt, the Atlas ones are evenly spaced.
Looking like a Koln then!
Thanks all!
Deffo a koln. I have one sat on my garage floor after replacing it with an atlas for more choice with different ratios.
quote:
Originally posted by scootz
quote:
Originally posted by pjay
What's your reason for you identying the axle (if you don't mind me asking)?
I need to know what it is so I can decide if I'm keeping it and fitting an LSD. Needs to run 250bhp / 200 ft/lbs on a 650kg car.
Thanks all... confirmed as being a Koln, so no use for my intentions
Would anyone like to buy a nice fresh looking Koln axle with 3,45 diff???