Board logo

Ford 7.5" Diff
scootz - 16/8/12 at 07:40 PM

Does anyone know the left / right offset for the output flanges on a Ford 7.5" diff (from the input flange centre line).

Cheers!

ChrisLeary - 16/8/12 at 08:33 PM

If I manage to get down the garage tomorrow I'll get some measurements Scootz.

ATB,
Chris

scootz - 16/8/12 at 08:40 PM

You're a star! Cheers!

Liam - 20/8/12 at 08:08 PM

From (rusty) memory, isn't the long shaft about 40mm longer than the short one? For both 7 and 7.5" diffs if I recall. So that, if right, would be your answer.

Steve Hignett - 20/8/12 at 08:20 PM

quote:
Originally posted by Liam
From (rusty) memory, isn't the long shaft about 40mm longer than the short one? For both 7 and 7.5" diffs if I recall. So that, if right, would be your answer.


If that were correct, wouldn't 20mm be the answer, rather than 40mm?

Liam - 21/8/12 at 06:39 AM

Well if you look at it that way (i.e. read the question properly) then yes

scootz - 21/8/12 at 07:09 AM