Board logo

Air Compressor and tools clear out
bigpig - 31/10/10 at 12:03 PM

Well its near IVA time & having to get a tin top for work so my compressor and tools are up for sale. As I've done the work that needs these tools and I need the space, I guess they are the first things to go.

Tools are in good nick, some just need a wipe down from oil and dust from storage in garage.

I don't want to split as its a right hassle, so its collection from Leicester (about 10 mins from J21a).
I think the lot is around £350 new and there are a mixed bag of unused and little use so I'd like £200 or near.

So I have up for grabs:
Cougar 25 air compressor (works well, just dirty from storage in garage).

Manual at: http://www.clarkeservice.co.uk/manuals/compressors/cougar25_50.pdf

Power Craft: (very little use)
Drill
Die Grinder
Ratchet
Impact Driver
Stapler

Clark (very little use)
Spray Gun
Oil Spray gun
duster
Inflater (with gauge)

Sip (small amount of use)
3" Cut off saw (the rubber handled version)
Air speed saw (the professional one I think is normally around £60)
Maxi Spot Sand Blaster
Air hose (I think it may be the yellow 10 meter or so, but I bought it and got the wrong coupling types).


A load of couplings of different types (inc quick release). I haven't connected up the SIP air hose as I'm a coupling or two short. I seems that there are two standards and I've bought a mixed bag of both types over the last couple of years.


Linky to photos of compressor and tools here

Sorry about the photo quality, its the nipper's camera and I didn't want to use up the last of his batteries. I can take some more photos later.

[Edited on 31/10/10 by bigpig]


marcjagman - 31/10/10 at 03:45 PM

Interested in the die grinder.


bigpig - 31/10/10 at 04:55 PM

Hi,
Thanks, but I don't really want to split them up really if I can avoid it.

I'm after cleaning space at the moment.

I found two bell housings, a couple of very rusty drum back plates & a type 9 gearbox I didn't know I had during tidy up


AndyW - 2/11/10 at 02:01 PM

how much for the type 9??


bigpig - 26/11/10 at 01:17 PM

Bump,
Sold the gearbox now, but the compressor and kit is still up for sale.

Dropping price to £180 ovno.


ChrisW - 26/11/10 at 09:29 PM

If you'd split I'd have some bits off you.

Chris


bigpig - 27/11/10 at 12:38 PM

I'd rather not split bits off. I can still make use of all the kit (if I keep it together) and make space if I don't sell, but its just to help fund the IVA as they don't get much use at the moment.


bigpig - 16/1/11 at 12:18 PM

*Bump*
Still got these and now I have had to buy a car, I need to start my IVA test fund again, so I'm reducing to £175 for the lot.


bigpig - 17/1/11 at 10:19 PM

Got an offer, waiting on a reply and further details.