Board logo

Various moulds, seats and air scoops for sale
fifty50 - 10/7/12 at 05:13 PM

Lowcost Seven, fibreglass Nose Cone Mould
Only used 5 times
£80

Single seater style nose cone mould, Nose cone to fit seven/lowcost style car
£50

Pair of Lowcost Seven, Fibreglass Rear Wheel Arch Moulds
Used only 3 times
£65

Fibreglass Seat mould for Kit Car seats
Used only a few times
Seat width 405mm at the Hip
£95

Fiberglass Kit Car seats
One grey and one black gelcoat, so would need painting to match. The grey seat has a small chip on the edge that needs filling prior to painting (small easy job)
£60 pair or £35 each SOLD

MGF Glass fibre Side Skirt and airscoop Moulds
Made from the original works team race car
Only used once
£100

Hyundai Coupe Fibreglass mould to produce race car style front valance modification
£20

Glass fibre mould to produce car bonnet/roof air scoops Ideal for sevens
£30

Glass fibre Bonnet/roof air scoop
Bond onto existing bodywork for that race car modified look
Have two £10 each, one was painted for a paint test

Suzuki cappuccino Fibreglass mould to produce racing style bonnets with air induct
£60

2 Wide wheel arche moulds (was made to fit Suzuki cappuccion) will fit many cars

Lightweight Fiberglass seat to fit track car (very low position)
£35


15miles west of Hull A63/M62

[Edited on 12/7/12 by fifty50]

loggyboy - 10/7/12 at 05:33 PM

What are the seat base widths please?

rash12 - 10/7/12 at 09:23 PM

pic and dimensions of bonnet scoop please

samjc - 11/7/12 at 04:59 AM

Info for where to collect parts and dimension of seats if not already sold.
cheers
sam

kipper - 11/7/12 at 08:20 AM

Hi . I will take the seat moulds please.
I believe you are based in Hull, if so Ican collect as I live there too.
Please U2U me with phone number.
Regards Denis.

owelly - 11/7/12 at 08:32 AM

I sent a U2U yesterday and still waiting for a reply...........

fifty50 - 11/7/12 at 06:54 PM

quote:
Originally posted by loggyboy
What are the seat base widths please?


405mm at the hip

fifty50 - 14/7/12 at 03:50 PM

Whats still left

Lowcost Seven, fibreglass Nose Cone Mould
Only used 5 times
£80

Single seater style nose cone mould, Nose cone to fit seven/lowcost style car
£50

Pair of Lowcost Seven, Fibreglass Rear Wheel Arch Moulds
Used only 3 times
£65

Fibreglass Seat mould for Kit Car seats
Used only a few times
Seat width 405mm at the Hip
£95


MGF Glass fibre Side Skirt and airscoop Moulds
Made from the original works team race car
Only used once
£100

Hyundai Coupe Fibreglass mould to produce race car style front valance modification
£20

Glass fibre mould to produce car bonnet/roof air scoops Ideal for sevens
£30

Glass fibre Bonnet/roof air scoop
Bond onto existing bodywork for that race car modified look
£10 It was painted for a paint test

Suzuki cappuccino Fibreglass mould to produce racing style bulged bonnets with air induct
£60

2 Wide wheel arche moulds (was made to fit Suzuki cappuccion) will fit many cars

Lightweight Fiberglass seat to fit track car (very low position)
£35

Vented Mini Bonnet mould (same as Zcars They copied mine)
£95

[Edited on 14/7/12 by fifty50]

nick997 - 18/7/12 at 01:13 PM

Any chance of a pic of the results of the bonnet scoops that can be created from the moulds please? i.e. the £30 mould and the scoop up for a tenner.

Thanks

Nick

fifty50 - 19/7/12 at 10:44 AM

quote:
Originally posted by nick997
Any chance of a pic of the results of the bonnet scoops that can be created from the moulds please? i.e. the £30 mould and the scoop up for a tenner.

Thanks

Nick


The bonnet scoop mould is sold, and i have one bonnet scoop left, The Nose cone mould and rear arch moulds,Pics for the nose cone and arches can be found on Ebay search Item no; 120949548149, For pics of the scoop send me an email and I will ping a pic over, I also have the MGF side skirts and hayundai coupe splitter moulds up on ebay

nick997 - 19/7/12 at 12:51 PM

U2U sent with email address

Cheers

Nick