Board logo

For Sale, xflow lightweight flywheel, exhaust silencer, springs, xflow head
myeates - 16/7/12 at 02:42 PM

Ive just had an exhaust system made for my car so now have a few bits for sale including a custom chrome silencer with about 1000miles use on it, the silencer is 43 cm long in the case and 12.5cm diameter (5 inch), this inlet pipe is 53mm od and tail pipe is 45mm with rolled end, is supposed to be repackable by removing the tail pipe, has some scrathes but still looks good on the car looking for around £50.




Also have some various exhaust parts, all stainless
extension pipe with flexi joint that is 56cm long and 52mm id at the short end and 53mmid at the long end.
Offers on this




some flexi pipe 50mm one length 29cm and the other 44cm, offers




pair of faulkner springs 225poundage 1.9id and 175mm length only dont about 300miles as were too soft for me £15 the pair




crossflow lightened flywheel i bought for my car but plans have changed slightly and going lighter this one is 7.6kg and had been done properly also had the face skimmed, £80





finnally for now a chambered crossflow head with 30mm exhaust and 37mm inlet needs a good clean and paint. Offers



all plus postage



Mark

[Edited on 16/7/12 by myeates]

[Edited on 16/7/12 by myeates]


steve m - 16/7/12 at 04:44 PM

Ive got that silencer on my 7 <<<
well pleased with it!


mikeb - 16/7/12 at 04:55 PM

u2u on silencer


myeates - 19/7/12 at 01:28 PM

Silencer and length with flexi part way along sold the rest is still here will take offers on the other bits to get them sold