Ford Crossflow exhaust manifold, previously fitted to a Pheonix, but should fit most kits with a similar chassis. Engine is currently a highly tuned 1700cc, but would have thought this manifold would suit a 1600 or a 1700, has been painted in heat resistant VHT paint on the outside and appears to be ceramic coated on the inside (looks like it to me but can't be sure).

The headers are 35mm ID/1.5 inch OD, into a 2" pipe for the silencer. There is approximately 31cm from the head flange to where the inside of the pipe comes vertically down, I can take more measurements if needed and can email some better pics. Looks a nicely made piece of kit that somebody obviously spent a fair bit on in the past.

£100 picked up from Mirfield/ Huddersfield or £120 delivered.





Pair of Pheonix sidepods, look very similar to the old Fury ones so may also fit a Fury. They are well used and the drivers side has taken a bit of a knock at some point, so could do with a bit of repair work, but would fairly easily make some decent bodywork with a bit of effort. They are thin race items so nice and lightweight.

£40 the pair picked up from Mirfield/ Huddersfield or £65 delivered.





Any questions, just let me know (ideally on henrythecarr@hotmail.com).

Cheers,
Henry

Now listed on ebay under:

Ford kent crossflow exhaust manifold Kit race car pheonix, westfield, locost | eBay

and

http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=181120473764

at £50 and £25 starting prices respectively.