Hi, I have sold my race engine and am now breaking my road registered race car.
I've listed below everything I'm selling seperately
AMB transponder £200
Lifeline Zero 360 Electrical 2.25Kg Fire Extinguisher Kit. Fully charged but out of date so needs recharge. £750 new, £350
Carbon mods ultralight seat £200
Race technology dash 2 with harness. Has only been fitted and never run. £500
Quick shift lever £30
Schroth 5 point harness black £75
Quaife close ratio S/cut box. Ratio's 2.39/1.54/1.21/1.1 /.87 Recently serviced £800
Race line Duratec bellhousing complete with hydraulic slave cylinder like new £200
Type 9 gear lever turret extension £30
SB Developments Alloy, Splittable, baffled Dry sump tank, VGC, £284 new, £175
Custom made 4-2-1 Exhaust system for tuned 2.0 Duratec. cost £1500 new. £900
Rolling Chassis. This includes:
Chassis, Duratec engine mounts
Red bodywork. Brand New black arches all round (fronts not fitted yet) Rear lights. All interior panelling. Wishbones modified for quick camber
change. dedion axle. Discs and calipers all round. Spax shocks. Switchgear. Sparco steering wheel with Lifeline weld on quick release boss. Carbon
mods wind deflector. Cut off switches. Propshaft. Rear rain light. Fuel tank. Electric fuel pump. Full approved rollcage. Wide angle rear view mirror.
Pedal box and master cylinders. Steering rack. Fuse box and loom. Basically everything shown on the rolling car in the pictures (except wheels and
dash display!) Random wheels will be fitted for rolling purposes. Registration docs and chassis plate on 2007 '07' plate. £3250
Pictures can be found here:
http://s543.photobucket.com/user/tommycrf450/library/Mobile%20Uploads
There are two pictures of the car in the above link from when it was running to see how it looked complete with the exhaust system fitted. Obviously
the complete car isn't what i'm selling as a rolling chassis! Feel free to call me on 07740948899.
Thanks. Tom
[Edited on 30/12/13 by tommy turtle]
Tommy, the library is locked(says private). I will like to have a look at the seats
[Edited on 30/12/13 by femster87]
Hi,
Ok sorry. I am crap at this technology lark. I'll try and sort it out now. It's just the one seat.
Thanks
Tom
Hi,
Im interested in the seat, do you have any dimensions, mainly width I'm interested in.
Kind Regards
Ed
Also is the dash the new one with the logger too, or just the standalone dash unit?
[Edited on 30/12/13 by eddie99]
It should be fixed now
The dash is a dash 2 stand alone unit.
Thanks.
I would be interested in the dash if it was cheaper, can buy them new for less than that
Hi. If they can bought new for less than that then of course I'll lower my price. Where have you seen then so cheap?
Thanks. Tom
quote:
Originally posted by tommy turtle
Hi. If they can bought new for less than that then of course I'll lower my price. Where have you seen then so cheap?
Thanks. Tom
I can't find that skunkwurx??? If you send me a link then I'll sort out a deal with you.
Cheers
Tom
Ah ha. Found it. £499. That's good. I'll send it to you for £450.
Do you have a link to skunkwurx? Can't find it either. I will be looking to buy a racetech 2 in a few months time and that sounds like a good price!
Hi there
I'm interested in the bellhousing, can you confirm that it is for a type 9 with the long input shaft?
Also where are you based?
Many thanks
Ian
Hi, I'm based in Aylesbury. The bellhousing is for type 9 to duratec. I'm not sure whether its for long or short shaft. If you can tell me
how long the shaft should be then i'll measure the one fitted to the bellhousing currently.
Thanks
U2u on the way!